204DTD Engine Rebuild and Replacement: 2.0 Ingenium Diesel (AJ200D Family)
We rebuild and recondition the 204DTD, the single-turbo 2.0 Ingenium diesel used in Land Rover and Jaguar models, usually by repairing the engine already in your car. Jaguar's family name for it is AJ200D, so you may see either name.
Rebuild your own 204DTD · Fitted replacement assessed where needed · Quote from your registration
Our specialist technicians have 15+ years' experience rebuilding Land Rover and Jaguar engines · 3,200+ engine rebuilds by our specialist technicians · 12-month unlimited mileage warranty
Enter your registration number for a free initial quote
Which Models Use the 204DTD Engine?
Range Rover Evoque (L538) 204DTD
MY2016–2019 · eD4 / TD4 150 PS and TD4 180 PS · transverse · 204DTD
The 2.0 Ingenium diesel replaced the earlier 2.2 diesel from the 2016 model year, so a 2015-registered Evoque can have either. Range Rover Evoque engine page · Quote for an Evoque 204DTD
Land Rover Discovery Sport (L550) 204DTD
MY2016–2019 · eD4 / TD4 150 PS and TD4 180 PS · transverse · 204DTD
Early 2015 cars used the 2.2 diesel; the Ingenium arrived for the 2016 model year. Discovery Sport engine page · Quote for a Discovery Sport 204DTD
Range Rover Velar (L560) D180
2017–2020 · D180 180 PS (other outputs by VIN) · longitudinal · 204DTD
The Velar's installation is longitudinal, so a transverse Evoque or Discovery Sport engine is not a straight swap. Range Rover Velar engine page · Quote for a Velar D180
Land Rover Discovery 5 (L462) Td4
2017–2018 UK range · Td4 180 PS · longitudinal · 204DTD
The Td4 left the UK range for MY2019; the twin-turbo Sd4 is a 204DTA, not a 204DTD. Discovery engine page · Quote for a Discovery Td4
Jaguar XE (X760) 2.0 Diesel
2015–2020 · 163 PS and 180 PS · longitudinal · AJ200D family / 204DTD
The XE was the first Jaguar with the Ingenium diesel; the 240 PS 25d is the twin-turbo 204DTA. Jaguar XE engine page · Quote for an XE 2.0 diesel
Jaguar XF (X260) 2.0 Diesel
2015–2020 · 163 PS and 180 PS · saloon and Sportbrake · longitudinal · AJ200D family / 204DTD
Earlier X250 XFs used a 2.2 diesel, so the platform is checked first. Jaguar XF engine page · Quote for an XF 2.0 diesel
Jaguar F-Pace (X761) 2.0 Diesel
2016–2020 · 163 PS and 180 PS · longitudinal · AJ200D family / 204DTD
Later D165 and D200 F-Pace models use the mild-hybrid 2.0, not this engine. Jaguar F-Pace engine page · Quote for an F-Pace 2.0 diesel
Jaguar E-Pace (X540) D150 / D180
2018–2020 · D150 and D180 · transverse · AJ200D family / 204DTD
The E-Pace shares the transverse layout of the Evoque and Discovery Sport, but ancillaries still need checking. Jaguar E-Pace engine page · Quote for an E-Pace 2.0 diesel
Early second-generation Evoques (2019–2020): some diesel versions may carry an engine from this family, but UK versions differ, and the mild-hybrid and manual front-wheel-drive configurations are not the same. Send your VIN and we will confirm which engine you have before we quote.
SERVICES WE OFFER
Reconditioned and Rebuilt 204DTD Engines
Most 204DTD enquiries begin with a timing-chain noise, an oil warning or a sudden loss of power. Our first aim is to keep your own engine: it already matches your car's installation, ancillaries and history.
Rebuilding your own 204DTD
We remove the engine, strip it and measure the block, crankshaft, cylinder head and camshafts. We then agree which internal parts need replacing with OEM parts. On a 204DTD that usually centres on the timing drive at the gearbox end, the bearings and the oil system. We also look for the cause of the failure, such as a fuel-dilution or boost fault, so the rebuilt engine isn't exposed to the same problem.
When a replacement 204DTD makes more sense
If the block or crankshaft is beyond economical repair, a matched replacement can be the better route. The donor must match your car's layout (transverse or longitudinal), output and equipment. We confirm all three before quoting a fitted replacement.
204DTD Engine Rebuild Cost UK
What a 204DTD rebuild quote covers
Our written quote lists diagnosis, strip-down, machining, internal parts, timing components, fluids and testing as separate lines. Removal and refitting are shown on their own line. The turbocharger, injectors, EGR cooler, DPF and sensors appear only if they need work and you agree to it.
Why two 204DTD quotes can differ
One quote may cover a bare engine, another a fitted job. Some include a timing kit and machining; others do not. The cheaper price can become the dearer job once removal, refitting, fluids and the original cause of failure are added. Compare written scopes line by line.
What to send for a useful initial quote
Send your registration, mileage, postcode, whether the car runs, and the order in which symptoms appeared: warning lights, noises, smoke, coolant or oil loss. Add any garage report, fault codes and invoices for previous engine work. If the engine has already been removed, tell us which ancillaries are still attached.
204DTD Engine Replacement Cost and Supply and Fit
A replacement 204DTD makes sense when your engine cannot be recovered. We assess a fitted replacement case by case and quote it individually; we don't hold a stock list. The price depends on the donor's condition and history, the installation and the parts that transfer from your engine.
Transverse or longitudinal: why the donor must match
The Evoque, Discovery Sport and E-Pace mount the engine across the car. The Velar, Discovery 5, XE, XF and F-Pace mount it lengthways. The core engine shares a code, but the sump, mountings, ancillary drives and wiring differ. A "204DTD for sale" advert that doesn't state the donor model is not proof of fit.
204DTD Engine for Sale: Used and Supply-Only Engines
We do not normally sell used engines. Many owners searching for a "204DTD engine for sale" or "2.0 Ingenium engine for sale" are better served by rebuilding the engine they have. If you have found a used or supply-only unit, send us the listing and your VIN. We will check whether it fits and compare the complete fitted cost with a rebuild.
What to ask before buying a used 204DTD
Ask for the donor VIN and model, documented mileage, the oil and timing-chain history, compression test results, what is included (turbo, injectors, sump, wiring) and the return terms. A used engine with a stretched chain or diluted oil can fail the same way as yours.
204DTD Timing Chain Problems and Replacement Cost
Specialists most often cite timing-chain wear on the 204DTD. The chain sits at the rear of the engine, by the gearbox. A worn chain, tensioner or guide lets the valve timing drift; if the chain jumps or breaks, pistons can strike valves.
Symptoms of a stretched 204DTD timing chain
A rattle on cold start that fades as the engine warms, timing or camshaft correlation fault codes, and rough running are the usual early signs. Low oil pressure warnings or a sudden cut-out are more serious. If you hear a persistent rattle, get the car checked before driving further.
Timing chain replacement or engine rebuild?
If the chain is caught before it slips, replacing the chain, tensioner and guides can be enough. If timing has already moved, or guide debris has reached the oil pick-up and starved the bearings, the job can become a head repair or a full rebuild. The rear position of the chain makes the work more involved than on a front-mounted chain; whether the engine or the gearbox has to come out depends on the vehicle and the procedure used, which we confirm in your quote. We quote chain-only work and rebuild work separately after inspection.
Recalls and service actions for the Ingenium timing chain
You can check safety recalls for your registration on the GOV.UK vehicle recall checker. Manufacturers can also run service actions or campaigns that don't appear there, and they can differ between markets. Ask a Jaguar Land Rover retailer to check your VIN for any open action affecting the engine or timing chain. Do not rely on a general statement either way.
204DTD Oil Dilution, DPF and Turbo Failure
Oil dilution is widely reported on the 204DTD. It can happen when extra fuel reaches the sump, for example if the diesel particulate filter keeps failing to regenerate on short journeys. It is a possible mechanism, not a diagnosis: we confirm the cause in your car.
Why the oil level rises on a 204DTD
A dipstick or level reading that climbs between services is a warning that fuel may be diluting the oil. Thinned oil protects the timing chain, bearings and turbo less well. Fixing the cause matters as much as changing the oil: a blocked DPF, a faulty sensor, an injector fault or a pattern of short trips.
Turbo failure on a 204DTD
The single turbocharger relies on clean oil. Bearing wear from diluted or contaminated oil, an oil-feed problem or debris can cause whistling, smoke or loss of boost. A turbo fault is not always an engine fault, so we check whether debris has also reached the engine before quoting.
204DTD Crankshaft, Bearing and Seized Engine Failure
When a 204DTD has run short of oil pressure, the crankshaft journals and big-end bearings can be damaged. A heavy knock, a low oil pressure warning, or an engine that stops and won't turn are the signs. Stop the car, don't keep trying to start it, and have it recovered rather than driven.
What we check on a knocking or seized 204DTD
We strip the engine and measure the crankshaft journals, bearing shells, bores and pistons. We check the oil pump and pick-up for debris, and the timing chain, guides and tensioner for wear. We also inspect the head and valve gear for contact damage. The pattern of wear helps show whether the cause was oil starvation, contamination, a timing event or something else, and whether the same cause is still present.
Can a seized 204DTD be rebuilt?
Often, yes, if the block and crankshaft can be machined within limits. If the block is cracked or the crank is beyond regrinding, we explain the replacement options and their full fitted cost. Either way you get the findings in writing before work is authorised.
Other 204DTD Faults: EGR, Injectors and Coolant Loss
Not every 204DTD fault needs a rebuild. Diagnosing these properly avoids rebuilding an engine that only needed an external repair.
EGR valve and EGR cooler faults
A sticking EGR valve can cause rough running, black smoke and limp mode. An internal EGR cooler leak can cause unexplained coolant loss and white smoke. We check the valve, the cooler and the coolant pressure before deciding whether the repair is external or whether the engine has been affected.
Injector faults and smoke
Failing or leaking injectors can cause smoke, misfires, hard starting and, in some cases, extra fuel in the oil. We test and inspect before recommending injector work, and tell you if oil contamination suggests the engine needs inspecting too.
Coolant loss on a 204DTD
Coolant loss with no visible leak can come from several places: hoses, the EGR cooler, the water pump or, in more serious cases, the cylinder head. We pressure test the system and check the oil for contamination before quoting.
204DTD Fault Evidence and Repair Route
This table shows how we usually read the evidence. It is a guide, not a diagnosis: the actual car decides.
| What you notice | What it may point to | Possible repair route | What changes the quote |
|---|---|---|---|
| Cold-start rattle that fades; timing or camshaft fault codes | Timing drive wear (chain, guides, tensioner) | Inspection, then chain kit; head work or rebuild if timing has moved | Access, damage found, parts and labour |
| Oil level rising; fuel smell; repeated DPF warnings | Fuel dilution of the oil | Find and fix the cause, change oil, inspect the engine if bearings may be affected | Cause found, wear present |
| Low oil pressure warning; heavy knock; sudden stop | Bearing or crankshaft damage | Strip and measure; reconditioning or replacement | Crank and block condition |
| Whistle, smoke, loss of boost | Turbo or boost-path fault | Check turbo, pipes and oil feed; turbo replacement; inspect engine for debris | Turbo cost, debris or contamination found |
| Coolant loss with no visible leak; white smoke | EGR cooler, hoses, water pump or head | Pressure test; external repair or head work | Where the loss is |
| Rough running, limp mode, black smoke | EGR valve, injectors or sensors | Diagnose, clean or replace the part | Parts, whether the engine is affected |
Is the 204DTD Reliable? Problems by Year
There is no single answer. Specialists report timing-chain wear, oil dilution and bearing problems on the 2.0 Ingenium diesel, and some say they see them more on early engines, but reports vary by source and we don't have reliable failure rates, so we don't publish any. Condition matters more than year: service history, the oil and interval used, journey pattern and any previous warnings tell you more than the badge.
Which Ingenium engine to avoid?
The question usually means "is a used 2.0 Ingenium diesel a risk?". It also covers petrol and 3.0 engines, which behave differently; see the Ingenium engine guide. For a 204DTD, a car with a full oil-change history at sensible intervals and no warning lights is a very different proposition from one with a cold-start rattle and a rising oil level. Ask for the service history and listen to a cold start before buying.
204DTD Engine Specifications
| Item | 204DTD |
|---|---|
| Configuration | Inline four-cylinder, 16 valves, twin overhead camshafts |
| Capacity | About 1,999 cc |
| Fuel system | Common-rail direct injection |
| Boosting | Single turbocharger |
| Outputs | 150 PS (110 kW), 163 PS (120 kW), 180 PS (132 kW), depending on model |
| Timing drive | Chain, at the rear (gearbox end) |
| Layouts | Transverse (Evoque, Discovery Sport, E-Pace); longitudinal (Velar, Discovery 5, XE, XF, F-Pace) |
Figures are typical published values; your VIN and the vehicle handbook confirm the exact engine and output.
204DTD Engine History and Versions
The 2.0 Ingenium diesel was introduced in 2015, first in the Jaguar XE. It then replaced the older 2.2 diesel in the Evoque and Discovery Sport for the 2016 model year. Land Rover parts systems use 204DTD for the single-turbo version.
Is AJ200D the same as 204DTD?
AJ200D is Jaguar's name for the 2.0 Ingenium diesel family. 204DTD is the Land Rover code for the single-turbo version, and some references list both single- and twin-turbo outputs under AJ200D. We keep AJ200D in our title because owners search for it, but fitment is decided by your VIN and the installed engine code, never by that name alone.
204DTD vs 204DTA
The 204DTA is the twin-turbo 240 PS version (SD4, D240 and Jaguar 25d). It shares the basic architecture but has different boosting and supporting parts, so the two are priced and sourced separately. See the 204DTA engine page.
204DTD vs the later D165 and D200 mild-hybrid
From the 2021 model year JLR moved its four-cylinder diesels to 48V mild-hybrid versions (D165 and D200). Jaguar's technical data describes them as a separate 48V mild-hybrid application with its own specification, so they are a later engine, not a relabelled 204DTD. See the later 2.0 Ingenium mild-hybrid diesel page.
204DTD vs the older 2.2 diesel
The Ford/PSA-derived 2.2 diesel (224DT) in earlier Evoques, Discovery Sports and the Freelander 2 is a completely different engine. A 2015-registered car can carry either, so check before ordering anything. See the 224DT engine page.
How to Identify a 204DTD Engine
Start with the VIN: a decode or parts lookup shows the engine fitted at the factory. The engine code is also stamped on the engine, and a dealer or parts counter can confirm it. Note the output (150, 163 or 180 PS), whether the car is transverse or longitudinal, and whether it is a later mild-hybrid model. A badge alone (TD4, eD4, D150, D180) is not enough to order a replacement.
When you ask us for a quote, send your registration and VIN, the badge on the tailgate, and a photo of the engine code if you can read it. If another garage has already identified the engine, send their report. We confirm the code before we price anything, because the twin-turbo 204DTA, the later mild-hybrid diesels and the older 2.2 look similar in adverts and are not interchangeable.
204DTD Engine Codes, Models and Outputs
| Model | Generation | Years | Badges | PS / kW | Layout | Model page |
|---|---|---|---|---|---|---|
| Range Rover Evoque | L538 | MY2016–2019 | eD4, TD4 | 150 / 110; 180 / 132 | Transverse | Evoque engines |
| Discovery Sport | L550 | MY2016–2019 | eD4, TD4 | 150 / 110; 180 / 132 | Transverse | Discovery Sport engines |
| Range Rover Velar | L560 | 2017–2020 | D180 | 180 / 132 | Longitudinal | Velar engines |
| Discovery 5 | L462 | 2017–2018 (UK) | Td4 | 180 / 132 | Longitudinal | Discovery engines |
| Jaguar XE | X760 | 2015–2020 | 2.0d | 163 / 120; 180 / 132 | Longitudinal | XE engines |
| Jaguar XF | X260 | 2015–2020 | 2.0d | 163 / 120; 180 / 132 | Longitudinal | XF engines |
| Jaguar F-Pace | X761 | 2016–2020 | 2.0d | 163 / 120; 180 / 132 | Longitudinal | F-Pace engines |
| Jaguar E-Pace | X540 | 2018–2020 | D150, D180 | 150 / 110; 180 / 132 | Transverse | E-Pace engines |
Years are a guide; the exact engine is confirmed by VIN. The twin-turbo 240 PS engine (204DTA), the later mild-hybrid D165/D200 and the 2.2 diesel (224DT) are not 204DTD applications.
Our 204DTD Engine Rebuild Process
We decode the VIN, read the fault codes and listen to the engine where it still runs. Once the engine is out, we strip it and clean the parts. We measure the crankshaft, bearings, bores and cylinder head, and inspect the timing chain, guides, tensioner and oil pick-up for debris. We then agree the work in writing: machining, OEM internal parts, the timing kit and anything connected that may have caused the failure.
When the engine is rebuilt, we refit it, refill and bleed the system, and test the car. We also check that the original cause, such as fuel in the oil, a boost fault or a cooling problem, has been dealt with, and tell you what we found and what was replaced so you have a record of the job.
204DTD Rebuild Warranty and Vehicle Collection
Our rebuilds carry a 12-month unlimited mileage warranty on covered parts and labour. Read the written warranty terms before booking; the cover applies to the work agreed in your quote. If the car can't be driven, tell us where it is and whether any parts have already been removed. We confirm whether collection is possible, and its price, before arranging it.
Accepted Work and Quote Scope
We accept mechanical engine rebuilding on 48V mild-hybrid vehicles. Plug-in-hybrid vehicles and hybrid electrical-system repairs are not accepted. We normally rebuild your existing engine. If that is uneconomic, we can source and fit a compatible replacement, quoted individually. Turbos and injectors are fitted or replaced alongside engine repairs only, not as standalone jobs.
Own-Engine Rebuild Starting Prices
These amounts cover rebuilding your own engine. Removal, refitting and recovery are separately quoted; turbos, injectors and other ancillaries are excluded unless named in writing. Exact application and damage are confirmed before work.
| Model | Engine family | Own-engine rebuilding |
|---|---|---|
| Discovery | 204dtd engine | from £4,500 + VAT (£5,400 inc. VAT at 20%) |
| Discovery Sport | 204dtd engine | from £4,000 + VAT (£4,800 inc. VAT at 20%) |
| Jaguar E-Pace | 204dtd engine | from £4,000 + VAT (£4,800 inc. VAT at 20%) |
| Jaguar F-Pace | 204dtd engine | from £4,000 + VAT (£4,800 inc. VAT at 20%) |
| Jaguar XE | 204dtd engine | from £4,500 + VAT (£5,400 inc. VAT at 20%) |
| Jaguar XF | 204dtd engine | from £4,500 + VAT (£5,400 inc. VAT at 20%) |
| Range Rover Evoque | 204dtd engine | from £4,000 + VAT (£4,800 inc. VAT at 20%) |
| Range Rover Velar | 204dtd engine | from £4,000 + VAT (£4,800 inc. VAT at 20%) |
204DTD Engine FAQs
How much does a 204DTD engine rebuild cost?
We quote the identified engine and required work after assessment. Published starting amounts apply only to their named model and engine; see own-engine rebuild prices. Removal, refitting and additional equipment are separately identified unless included in writing.
Does the 204DTD have a timing belt or a timing chain?
A chain, mounted at the rear of the engine. Some online guides wrongly say it uses a belt.
Can I drive with a 204DTD timing chain rattle?
It is not advisable. A stretched chain can slip and cause major internal damage, so have it inspected before further driving.
Is the AJ200D the same as the 204DTD?
AJ200D is Jaguar's name for the 2.0 Ingenium diesel family, and 204DTD is the Land Rover code for the single-turbo version. Because some references use AJ200D for more than one version, we confirm the exact engine by VIN.
Will a 204DTD from a Jaguar fit my Land Rover?
Not automatically. The core engine is shared, but transverse and longitudinal installations differ, and ancillaries and software vary by model. We check the donor against your VIN.
Is my 2.0 diesel a 204DTD or a 204DTA?
The 204DTD is the single-turbo 150–180 PS engine; the 204DTA is the twin-turbo 240 PS version. Send your registration and we'll confirm which you have.
How long does a 204DTD rebuild take?
It depends on the damage found and parts availability. We confirm a timescale in your written quote after inspection.
Get Your 204DTD Engine Quote
Enter your registration for a free initial quote. Tell us the symptoms, mileage, postcode and whether the car runs. We'll assess rebuilding your own 204DTD first and explain any replacement option.
Prefer to talk? Call 01268 944339 or WhatsApp 07351 691324.
Speak to Our Engine Rebuild Team
Our specialist technicians bring 15+ years’ experience and 3,200+ engine rebuilds. Our rebuild work carries a 12-month unlimited-mileage warranty on covered components and labour, subject to the written warranty terms and the required chargeable 2,000-mile service. No deposit is required for standard engine work; any advance payment for bespoke parts is agreed separately.
Call 01268 944339, WhatsApp 07351 691324, email info@rangeroverengines.uk, or request a free initial quote.
Workshop: Unit A5, Windsor Road Commercial Estate, Ramsden Heath, Billericay, Essex CM11 1QE. Hours: Monday–Friday 9am–6pm; Saturday 11am–2pm.
Contracting company: JLR Engine Specialists Ltd, company number 16500838. One Billericay workshop; other areas served through collection.