3.0 Ingenium Straight-Six Petrol Rebuild, Reconditioning and Replacement

This is the inline-six Ingenium petrol, distinct from the older supercharged AJ126 V6. Its 48V assistance and associated controls mean an engine-work quote must state whether the concern is in the petrol core, boosting or electrical support.

Own-engine rebuilding: Individual quote

An own-engine rebuild quote identifies the required mechanical work. The pricing policy explains the price basis. If you bring us the vehicle, we quote the full fitted job before booking.

Our specialist technicians have 15+ years' experience rebuilding Land Rover and Jaguar engines · 3,200+ engine rebuilds by our specialist technicians · 12-month unlimited mileage warranty

Own-engine rebuilding and vehicle installation are separate quote scopes. If your vehicle comes to our workshop, we give the full removal, rebuilding and refitting price before booking. Recovery is quoted if required. Turbochargers, injectors and other ancillaries are excluded unless listed in the agreed scope. See how our prices work.

Get a free initial quote

3.0 Ingenium petrol Engines by Vehicle

Identify your model below, then send the VIN to confirm the installed code and the applicable rebuild route.

Range Rover Sport 3.0 Ingenium petrol

L494 · MY2021 example; L494 / L461 · MY2021 onward family · 400 / 360 PS · longitudinal

Own-engine rebuilding: Individual quote

View Range Rover Sport engines · Quote for Range Rover Sport 3.0 Ingenium petrol rebuilding

Range Rover 3.0 Ingenium petrol

L405 · MY2020 introduction; L460 · launch family; L460 · later UK range · 400 / 360 / 380 PS · longitudinal

Own-engine rebuilding: Individual quote

View Range Rover engines · Quote for Range Rover 3.0 Ingenium petrol rebuilding

Range Rover Velar 3.0 Ingenium petrol

L560 · MY2021 introduction · 400 PS · longitudinal

Own-engine rebuilding: Individual quote

View Range Rover Velar engines · Quote for Range Rover Velar 3.0 Ingenium petrol rebuilding

Defender 3.0 Ingenium petrol

L663 · launch / earlier range · 400 PS · longitudinal

Own-engine rebuilding: from £5,500 + VAT (£6,600 inc. VAT at 20%)

View Defender engines · Quote for Defender 3.0 Ingenium petrol rebuilding

Discovery 3.0 Ingenium petrol

L462 · MY2021 update · 360 PS · longitudinal

Own-engine rebuilding: Individual quote

View Discovery engines · Quote for Discovery 3.0 Ingenium petrol rebuilding

Jaguar F-Pace 3.0 Ingenium petrol

X761 · MY2021 introduction · 400 PS · longitudinal

Own-engine rebuilding: Individual quote

View Jaguar F-Pace engines · Quote for Jaguar F-Pace 3.0 Ingenium petrol rebuilding

3.0 Ingenium petrol Reconditioning Prices

VehicleOwn-engine rebuild price
Range Rover SportIndividual quote
Range RoverIndividual quote
Range Rover VelarIndividual quote
Defenderfrom £5,500 + VAT (£6,600 inc. VAT at 20%)
DiscoveryIndividual quote
Jaguar F-PaceIndividual quote

See the rebuild price scope for access labour and excluded equipment.

P400 engine rebuild cost and petrol I6 identification

The P360/P400 range in the new Range Rover differs from earlier AJ126 V6 applications. Some P340 and P380 versions are market-specific, so they must not be advertised as UK cards merely because a global release mentions them.

The listed P360/P400 rebuild starting prices vary by model. The final scope depends on the petrol-six variant, installed equipment and stripped-core findings.

Turbocharging, electric assistance and a power-loss enquiry

JLR describes an electrically assisted boosting arrangement on the launch Defender P400. A boost complaint can therefore concern conventional turbo hardware, electric assistance, supply voltage, controls or combustion. A single underboost code does not prove that the inline-six needs reconditioning.

The appropriate test sequence separates the air path and electrical supply from cylinder sealing and oil-pressure evidence. An internal-engine quote does not automatically cover a starter-generator, battery or electric boosting device. Those components need to be named if work is included.

Petrol misfire, coolant loss and the rebuild boundary

Cylinder-specific misfire should be checked against ignition and fuelling as well as compression. If it began after overheating, cooling-pressure and cylinder-sealing evidence are especially useful. A contained head repair differs from restoring a damaged bore, piston or bottom end.

On a running vehicle, record whether the complaint occurs at a cold start, restart or under load. The condition in which it appears can distinguish an accessory/control problem from the mechanical core. Avoid continuing to run the engine to demonstrate a severe noise or low-pressure fault.

3.0 Ingenium petrol engine for sale versus your own core

A P400 donor must match the vehicle's installation and hybrid assistance. The engine name and car badge are only the beginning of a parts match.

Restoring the installed engine can preserve its known identity when the block and crank are repairable. If a donor is needed, establish its history, included equipment and what will be transferred from the original. Use the complete fitted cost to compare the routes.

3.0 Ingenium petrol Faults: What the Inspection Needs to Establish

Cooling or overheating symptoms

A leak or temperature warning must be diagnosed before a head or block rebuild is sold. Electrically assisted components can also affect operating conditions.

Pressure-test, review event history and inspect cylinder sealing if overheating was sustained.

Boost response and 48V assistance

A lack of performance can arise in conventional turbo hardware, electric assistance, intake controls or the petrol engine itself.

Read relevant powertrain modules and test boost, supply voltage and mechanical compression in a defined sequence.

Misfire and internal mechanical noise

Combustion irregularity can be ignition or fuel related, while low compression and persistent knocking suggest mechanical investigation.

Use cylinder-specific data, oil pressure and leak-down or borescope evidence before recommending a rebuild.

P400 Mechanical Repair and Assisted Boosting

On this petrol six, cylinder sealing and lubrication measurements answer whether the mechanical core is damaged. Boost and electrical readings answer a different question about the powertrain around it. A provider should explain which evidence supports a rebuild rather than relying on an acceleration complaint alone. The installed variant determines the relevant assistance and control equipment.

A warm misfire, cold-start irregularity or restart complaint can have different triggers. Record when the event happens, the messages displayed and any recent fuel, ignition or cooling work. Replacing those parts repeatedly without a mechanical test is not a substitute for diagnosis, but a healthy core should not be stripped merely because a control fault persists.

Where internal repairs are justified, the measured crank, bores and head establish reuse and machining. OEM parts are selected for that variant. The electric boosting, starter-generator and other peripherals remain separate decisions unless the quote explicitly includes them.

Buying a Petrol Six After an Engine Failure

An advertised donor's complete identity matters more than “P400 suitable for JLR”. Obtain its original vehicle, stamp, included accessories and documented running history.

If the original can be retained, rebuilding avoids introducing an undocumented donor history, while still requiring the initiating fault to be repaired. If the original is unusable, donor matching and a complete fitted quotation are needed. The choice should follow evidence and total cost rather than an assumed advantage of any one badge.

P400 Petrol Repairs by Vehicle

Range Rover Sport and Full-Size Range Rover

The Sport and full-size Range Rover petrol-six enquiries need their own generation and VIN. A P400 badge does not turn an L494, L461, L405 or L460 installation into the same complete replacement. On a removed engine, identify what equipment has stayed with the car and what was supplied for inspection. This avoids comparing a bare core with a fitted-engine offer.

Velar P400 and Defender P400

The Velar P400 starting price above applies to its own petrol-six engine. The Defender figure applies only to the Defender application. A boost complaint also needs the assisted-boost and electrical findings reviewed alongside the combustion engine. Loss of performance without internal evidence can justify a smaller repair.

Discovery P360 and F-Pace P400

The Discovery P360 and MY2021 F-Pace P400 are separate model installations within the straight-six petrol family. The F-Pace P400 produces 400 PS and uses mild-hybrid assistance.

For either six-cylinder vehicle, the quote should follow oil, cooling and cylinder findings where internal damage is suspected. Petrol-core reconditioning and repair of the supporting electrical or boost equipment remain defined elements rather than one assumed package.

3.0 Ingenium petrol Models, Engine Codes and Years

ModelGenerationYears / documented MY referenceBadgesPSkW*LayoutModel page
Range Rover SportL494L494 · MY2021 exampleP400 petrol400294LongitudinalRange Rover Sport
Range Rover SportL494L494 / L461 · MY2021 onward familyP360 petrol360265LongitudinalRange Rover Sport
Range RoverL405L405 · MY2020 introductionP400400294LongitudinalRange Rover
Range RoverL460L460 · launch familyP360360265LongitudinalRange Rover
Range RoverL460L460 · launch familyP400400294LongitudinalRange Rover
Range RoverL460L460 · later UK rangeP380380280LongitudinalRange Rover
Range Rover VelarL560L560 · MY2021 introductionP400400294LongitudinalRange Rover Velar
DefenderL663L663 · launch / earlier rangeP400400294LongitudinalDefender
DiscoveryL462L462 · MY2021 updateP360360265LongitudinalDiscovery
Jaguar F-PaceX761MY2021 introduction; later variant by VINP400 straight-six MHEV400294LongitudinalJaguar F-Pace

*kW uses the published convention for 339, 350, 380 and 565 PS examples; other figures are whole-number conversions from PS. Combined hybrid output is labelled. Year references identify an application; the VIN and installed code settle fitment.

Identifying the 3.0 Ingenium petrol Before Ordering Parts

JLR documents P360/P400 Range Rover applications and P400 Defender. Sport, Discovery, Velar and F-Pace applications should be matched against the UK variant and VIN; a P340/P380 badge from a different market is not automatically a UK card.

3.0-litre inline-six petrol Ingenium family; JLR documents P400 at 400 PS on L405 and P360/P400 on newer Range Rover. Variant-specific electrification and output are VIN-dependent.

For an outstanding safety recall, use the GOV.UK vehicle recall check and ask a JLR retailer about VIN-specific campaigns and service actions. An overseas bulletin does not establish UK eligibility.

3.0 Ingenium petrol Warranty and Recovery Enquiries

Our rebuilds carry a 12-month unlimited mileage warranty on covered parts and labour. Read the written warranty for the contracted 3.0 Ingenium petrol work. Give your postcode and explain whether the car starts, rolls or has already been dismantled so recovery and the installed-job scope can be assessed.

Petrol I6 Reconditioning, Parts and Return-to-Service Scope

The purpose of a strip is to establish which major components can be retained and which need repair or replacement. A petrol-six misfire with poor cylinder sealing and a severe lubrication event may lead to different work. A replacement recommendation should identify what makes the original core unusable rather than be based only on a nominal P400 output.

Match OEM internal parts against the installed version. For a fitted repair, also identify the cooling and boosting equipment and whether electrical assistance needs separate work. The quote should tell the owner which systems were inspected and which components were actually renewed.

A donor with a matching badge

Obtain its vehicle identity, exact parts specification and condition evidence. A P400 from one platform is not confirmed for another by its badge alone. Ask what the seller means by complete engine and whether recipient accessories are expected to transfer.

The returned vehicle needs the checks and warranty specified in the contract. An owner seeking a reconditioned three-litre petrol should receive a clear petrol-core offer and a completed-job price, not a promise about every assisted-boost or 48V component irrespective of diagnosis. Parts-dependent timing is set once that scope is agreed.

Accepted Work and Quote Scope

We accept mechanical engine rebuilding on 48V mild-hybrid vehicles. Plug-in-hybrid vehicles and hybrid electrical-system repairs are not accepted. We normally rebuild your existing engine. If that is uneconomic, we can source and fit a compatible replacement, quoted individually. Turbos and injectors are fitted or replaced alongside engine repairs only, not as standalone jobs.

Own-Engine Rebuild Starting Prices

These amounts cover rebuilding your own engine. Removal, refitting and recovery are separately quoted; turbos, injectors and other ancillaries are excluded unless named in writing. Exact application and damage are confirmed before work.

ModelEngine familyOwn-engine rebuilding
Defenderingenium 3 0 petrol enginefrom £5,500 + VAT (£6,600 inc. VAT at 20%)

3.0 Ingenium petrol FAQs

How much does a 3.0 Ingenium petrol rebuild cost?

We quote the identified engine and required work after assessment. Published starting amounts apply only to their named model and engine; see own-engine rebuild prices. Removal, refitting and additional equipment are separately identified unless included in writing.

What repair evidence matters most?

Pressure-test, review event history and inspect cylinder sealing if overheating was sustained.

Can an external fault explain the complaint?

Boost response and 48V assistance: A lack of performance can arise in conventional turbo hardware, electric assistance, intake controls or the petrol engine itself.

Which similarly named engine must be kept separate?

AJ126 is a V6 with a mechanical supercharger.

What changes the final cost?

The same P400 name appears in multiple vehicles; it is the installation and model year that determine compatible ancillaries and parts.

How long will this engine repair take?

The 3.0 Ingenium petrol job is scheduled around the confirmed variant, damage and machining or parts needs. We give a timescale with the written scope after assessment.

What happens if I have found a used unit?

Send the donor advert and the recipient VIN for a 3.0 Ingenium petrol compatibility assessment. We usually assess recovering your installed core first; an advertised engine price does not include the complete installation.

Get a 3.0 Ingenium petrol Engine Quote

Send the registration, mileage, postcode and fault history. We will identify the 3.0 Ingenium petrol application and discuss rebuilding the existing engine or an appropriate installed replacement.

Request my initial quote

Prefer to talk? Call 01268 944339 or WhatsApp 07351 691324.

Speak to Our Engine Rebuild Team

Our specialist technicians bring 15+ years’ experience and 3,200+ engine rebuilds. Our rebuild work carries a 12-month unlimited-mileage warranty on covered components and labour, subject to the written warranty terms and the required chargeable 2,000-mile service. No deposit is required for standard engine work; any advance payment for bespoke parts is agreed separately.

Call 01268 944339, WhatsApp 07351 691324, email info@rangeroverengines.uk, or request a free initial quote.

Workshop: Unit A5, Windsor Road Commercial Estate, Ramsden Heath, Billericay, Essex CM11 1QE. Hours: Monday–Friday 9am–6pm; Saturday 11am–2pm.

Contracting company: JLR Engine Specialists Ltd, company number 16500838. One Billericay workshop; other areas served through collection.