Discovery 4 3.0 Diesel Engine Failure Repair
For a Discovery 4 with a failed 3.0 diesel, the first decision is what failed: lubrication, timing, compression or a connected system. We focus on the Discovery 4 installation and the engine condition, not a generic Discovery 5 replacement quote.
Ask about this fault · Vehicle engine options
Repair Cost and What the Quote Covers
For the named Discovery 306DT 3.0 V6 diesel application, own-engine rebuilding is from £5,000 + VAT (£6,000 inc. VAT at 20%). This is not a chain-only, crankshaft-only or fitted-replacement tariff. We confirm that the actual vehicle matches the application before confirming your quote.
Removal, refitting and recovery are separate; turbochargers, injectors and other ancillaries are excluded unless specified in the written quote. The original crank, block and head condition can change the work beyond a normal rebuild. Compare model-specific rebuild prices.
| Inspection result | Repair decision | Quote scope |
|---|---|---|
| Fault isolated without established core damage | Targeted repair where suitable | Confirm the failed system and required parts |
| Repairable internal damage | Rebuild the original core | Measure, machine and replace specified parts |
| Core not economically serviceable | Compare another suitable unit | Verify identity, condition and installation work |
Discovery 4 L319 Identification
Confirm the vehicle as a Discovery 4 and supply the VIN and installed engine details. A registration year at a generation boundary is not sufficient. The later L462 Discovery has a different vehicle job even where engine-family terminology overlaps.
Knock or Oil-pressure Warning Before the Stop
Give the warning sequence and whether the engine ran afterward. We check actual pressure where safe and inspect the oil evidence. If it no longer turns, it remains off while we plan the seizure assessment.
Non-start After a Sudden Mechanical Event
Tell us whether there was noise, overheating, fluid loss or previous timing work. We establish rotation and compression evidence before deciding to open the engine. A scan report is useful but cannot describe the condition of the crankshaft.
Core Damage versus Turbo or Cooling Equipment
A turbo or cooling complaint can be connected to the failure without being part of the normal rebuild scope. We identify the damaged core components and any separate ancillary work, so the total vehicle quote is understandable.
Rebuild Economics for a Working Vehicle
Service history, transmission condition and the rest of the vehicle influence your decision. We provide the engine findings and scope so you can compare repair with another compatible unit rather than deciding only from a headline engine price.
Evidence That Helps Us Quote the Right Job
Send the VIN, installed engine identification, mileage, the sequence before the failure and any oil-pressure or temperature warning. State whether it turns, cranks normally or is mechanically locked. Previous oil/filter findings and a garage report help us distinguish a core inspection from further tests on the vehicle. If it has been opened already, retain the damaged parts and record what was removed.
Diagnostic and Strip-Down Charges
The initial enquiry is free. Our diagnostic fee is typically £99–£149 + VAT (£118.80–£178.80 inc. VAT at 20%), deducted from repair if you proceed. Engine removal or strip-down is separately agreed. Diagnostic booking.
Insured Collection or a Removed Engine
Collection and delivery start from £70 inc. VAT, mileage-priced in advance; pickup is usually within 1–2 working days once booked. We hire recovery with vehicle transit insurance. Removed-engine pallet cover is agreed separately. Vehicle collection · Pallet-engine intake.
Timing Belt and Engine Damage
We identify the affected timing-drive components for the actual engine rather than treating it as the Ingenium chain job. A failed timing component and a failed crankshaft are not interchangeable diagnoses. We do not copy a generic chain-kit service or a petrol VVT parts list into a TDV6 repair quote.
Discovery 4 Engine Repair After a Breakdown
For the L319, we establish whether the engine stopped with oil pressure, temperature or timing symptoms before discussing a rebuild. A car that cranks normally can need a different investigation from a mechanically locked engine. If a garage has already opened the sump or head, retain its findings and damaged components. We use them to determine what still needs measuring. The full quote covers the Discovery 4 vehicle job alongside the damaged engine, rather than borrowing an L462 installation amount.
Frequently Asked Questions
How Much Does Discovery 4 3.0 Diesel Engine Repair Cost?
For the Discovery 306DT 3.0 V6 diesel application, own-engine rebuilding is from £5,000 + VAT (£6,000 inc. VAT at 20%). That is the starting price for rebuilding your own engine, not a fixed price for every cause of this fault; removal, refitting, recovery and ancillaries are quoted separately.
Can you identify it from the vehicle badge?
We check the VIN and installed engine. For this enquiry the relevant family is 306DT 3.0 V6 diesel; the badge alone does not establish exact compatibility.
Can the original engine always be rebuilt?
No. The condition of the block, crank and head determines what can be retained and whether the work is economic.
Are turbochargers and injectors included?
Only if the written quote explicitly includes their work. They are not automatically part of the base engine rebuild.
Should I send a report from another garage?
Yes. Send the complete findings and details of parts already removed. We explain what evidence can be used and what still needs checking.
How long will the work take?
We agree an expected schedule after identifying the unit, inspection requirements and parts availability. A strip-down finding can change the required work and timing.
More on this engine · Related service
Speak to Our Specialist Technicians
Our specialist technicians have 15+ years’ experience and 3,200+ engine rebuilds. Our rebuild work includes a 12-month unlimited-mileage warranty on covered components and labour, subject to the written warranty terms and the required chargeable 2,000-mile service. No deposit is required for standard engine work; any advance payment for bespoke parts is agreed separately.
Call 01268 944339, WhatsApp 07351 691324, email info@rangeroverengines.uk or request a free initial quote.
Workshop: Unit A5, Windsor Road Commercial Estate, Ramsden Heath, Billericay, Essex CM11 1QE. Hours: Monday–Friday 9am–6pm; Saturday 11am–2pm.
Contracting company: JLR Engine Specialists Ltd (company number 16500838). We operate one workshop at Billericay; other areas are served through arranged collection.