1.5 Ingenium Petrol Engine Rebuild: Evoque P160
We accept mechanical engine repair and rebuilding enquiries for the non-plug-in Evoque P160 1.5-litre three-cylinder petrol engine. We identify the installed unit, assess the fault and quote the work on your own engine. Mechanical work on its mild-hybrid installation is accepted; hybrid electrical repairs are excluded.
Get a free initial quote · Call 01268 944339
Evoque P160 Engine Rebuild Enquiry
Range Rover Evoque L551 P160
1.5-litre three-cylinder petrol · P160 · 160 PS / 118 kW · non-plug-in mild-hybrid application introduced in 2020. Exact installed engine identity and vehicle specification are confirmed before ordering parts.
Own-engine rebuilding: Individual quote. Removal, refitting and recovery are separate; turbochargers, injectors and ancillaries are excluded unless expressly included in writing.
View Evoque engines · Request a P160 mechanical engine quote
| Vehicle | Engine and application | Output | Own-engine rebuild |
|---|---|---|---|
| Evoque L551 | P160 1.5 three-cylinder petrol; introduced 2020, exact build by VIN | 160 PS / 118 kW | Individual quote |
P160 Rebuild Cost and What the Quote Covers
A repair price depends on the fault, reusable core, parts and vehicle labour. We do not publish a fixed P160 rebuild price. The written proposal separates investigation, engine work and installation so a bench repair is not confused with a completed vehicle job.
If a garage retains your vehicle and sends the removed engine, agree its contents and the return assembly before dispatch. Missing components or a previously dismantled core can change what must be inspected. See send us your engine and trade rebuilding.
P160 Is Not P300 or a Plug-In-Hybrid Offer
The P160 is the accepted non-plug-in application on this page. A 2.0 P300 is a different petrol engine. Shared engine-family ancestry does not establish interchangeable assemblies or acceptance of every vehicle using related components.
We do not accept P300e, other plug-in-hybrid vehicles, battery, charging or hybrid electrical repairs. We do not offer this work on Discovery Sport or E-Pace plug-in vehicles. The 2.0 Ingenium petrol page covers a separate family.
Misfire, Cooling and Oil-Use Complaints
Establish the Running Fault
A misfire can concern ignition, fuelling, air or mechanical compression. Send the complete diagnostic results and what has already been replaced. We establish the evidence before assuming internal damage. A fault code alone does not determine a complete rebuild.
Identify Internal Damage Where Indicated
Compression, leakage or bore inspection may help define a mechanical repair when justified by the symptoms. The engine specification and test conditions matter. If stripping is required, we agree its scope and charge separately before work.
Assess the Cause Alongside the Core
Relevant oil, cooling and turbo findings are considered with the internal condition. Renewing a damaged core does not automatically correct a separate connected-system problem. We fit or replace turbos and injectors alongside accepted engine repairs, not as standalone component jobs.
Recondition Your Engine or Source a Replacement
We assess retaining the original engine first. Head condition, the block, pistons and other measured findings determine what can be restored and what must be replaced. We explain the viable route instead of promising every core can be recovered.
If rebuilding is uneconomic, we can source and fit a compatible replacement, quoted individually. The proposed unit, supplied contents and vehicle installation need matching; a related family name or an online photograph is not sufficient. See replacement cost and scope.
Book the Correct Mechanical Assessment
Send registration or VIN, mileage, symptoms, postcode and existing reports. Tell us whether the car runs or the unit has already been removed. We confirm the diagnostic stage before booking and discuss the expected sequence once the required work and parts are established.
Accepted Work and Quote Scope
We accept mechanical engine rebuilding on 48V mild-hybrid vehicles. Plug-in-hybrid vehicles and hybrid electrical-system repairs are not accepted. We normally rebuild your existing engine. If that is uneconomic, we can source and fit a compatible replacement, quoted individually. Turbos and injectors are fitted or replaced alongside engine repairs only, not as standalone jobs.
P160 Engine FAQs
Do you accept Evoque P160 engine rebuilding?
Yes. We accept mechanical repair and rebuilding of the non-plug-in P160 installation, subject to inspection and the agreed repair scope.
Do you also work on P300e vehicles?
No. Plug-in-hybrid vehicle work is excluded, even where the petrol engine has related ancestry.
Is there a fixed P160 rebuild price?
No. We quote this application individually after identifying the unit and required work.
Does the engine quote include electrical mild-hybrid repairs?
No. We accept mechanical engine work, not hybrid electrical repairs.
Can my garage send the removed engine?
Yes, by arrangement. Confirm the engine identity, contents, packing and return specification before dispatch.
Is P160 the same as the 2.0 P300?
No. The P160 here is a 1.5-litre three-cylinder petrol application; the 2.0 petrol follows its own identification and repair route.
How long will rebuilding take?
We discuss the schedule after inspection and identification of the necessary parts and machining; no universal turnaround applies.
Speak to Our Engine Rebuild Team
Our specialist technicians bring 15+ years’ experience and 3,200+ engine rebuilds. Our rebuild work carries a 12-month unlimited-mileage warranty on covered components and labour, subject to the written warranty terms and the required chargeable 2,000-mile service. No deposit is required for standard engine work; any advance payment for bespoke parts is agreed separately.
Call 01268 944339, WhatsApp 07351 691324, email info@rangeroverengines.uk, or request a free initial quote.
Workshop: Unit A5, Windsor Road Commercial Estate, Ramsden Heath, Billericay, Essex CM11 1QE. Hours: Monday–Friday 9am–6pm; Saturday 11am–2pm.
Contracting company: JLR Engine Specialists Ltd, company number 16500838. One Billericay workshop; other areas served through collection.