4.4 Twin-Turbo V8 Petrol Rebuild, Reconditioning and Replacement
The newer 4.4 twin-turbo petrol V8 is a separate family from the older 5.0 AJ133 supercharged V8 and the 4.4 SDV8 diesel. We quote the V8 mechanical core and any accompanying turbo work separately. Hybrid electrical repairs are not offered.
Own-engine rebuilding: Individual quote
An own-engine rebuild quote identifies the required mechanical work. The pricing policy explains the price basis. If you bring us the vehicle, we quote the full fitted job before booking.
Our specialist technicians have 15+ years' experience rebuilding Land Rover and Jaguar engines · 3,200+ engine rebuilds by our specialist technicians · 12-month unlimited mileage warranty
Own-engine rebuilding and vehicle installation are separate quote scopes. If your vehicle comes to our workshop, we give the full removal, rebuilding and refitting price before booking. Recovery is quoted if required. Turbochargers, injectors and other ancillaries are excluded unless listed in the agreed scope. See how our prices work.
4.4 twin-turbo V8 Engines by Vehicle
Identify your model below, then send the VIN to confirm the installed code and the applicable rebuild route.
Range Rover Sport 4.4 twin-turbo V8
L461 · MY2023 P530 / MY2024 SV · 530 / 635 PS · longitudinal
Own-engine rebuilding: Individual quote
View Range Rover Sport engines · Quote for Range Rover Sport 4.4 twin-turbo V8 rebuilding
Range Rover 4.4 twin-turbo V8
L460 · MY2022 P530 / MY2024 SV P615 · 530 / 615 PS · longitudinal
Own-engine rebuilding: Individual quote
View Range Rover engines · Quote for Range Rover 4.4 twin-turbo V8 rebuilding
Defender 4.4 twin-turbo V8
L663 · OCTA introduced 2024 · 635 PS · longitudinal
Own-engine rebuilding: Individual quote
View Defender engines · Quote for Defender 4.4 twin-turbo V8 rebuilding
4.4 twin-turbo V8 Reconditioning Prices
| Vehicle | Own-engine rebuild price |
|---|---|
| Range Rover Sport | Individual quote |
| Range Rover | Individual quote |
| Defender | Individual quote |
See the rebuild price scope for access labour and excluded equipment.
Identify the Engine: P530, P615, SV and OCTA
This 4.4 petrol V8 is fitted to the newer L460 Range Rover, L461 Sport and Defender OCTA. P530 and P615, Sport SV and OCTA describe different applications. They must be kept apart from the AJ133 5.0 supercharged V8 and the 448DT 4.4 diesel.
Output examples are shown below; the installation and component revisions still need matching.
Range Rover L460 P530 and SV P615
A full-size Range Rover V8 enquiry starts with the L460 generation, its P530 or P615 specification and the date of the fault. Both belong to the newer 4.4 twin-turbo petrol group. Neither is the older L405 4.4 diesel nor the 5.0 supercharged engine. Autobiography and SV trim names help describe the car but do not identify every mechanical revision.
Range Rover Sport L461 P530 and 635 PS SV
The L461 Sport P530 and Sport SV are separate enquiries within the same broad V8 family. The SV uses a 635 PS twin-turbo mild-hybrid V8; it must not be matched to an older L494 SVR simply because both are performance Range Rovers. The SVR's 5.0 supercharged AJ133 has its own engine page.
Defender OCTA 4.4 Twin-Turbo MHEV
Defender OCTA uses the 635 PS 4.4 petrol V8, introduced in 2024. It is not the Defender's 5.0 supercharged V8. OCTA uses a distinct vehicle installation. Its turbo, cooling and mild-hybrid equipment must remain identifiable when a removed unit or donor is assessed.
For a vehicle that stopped during demanding use, describe the warning sequence and whether it had an impact, fluid leak or overheating event. Recovery condition also matters: a non-running car with drivetrain restrictions needs an appropriate transport arrangement. Please supply that information before arranging delivery rather than assuming that every non-starting Defender can be moved in the same way.
What Can Be Quoted on a BMW-Sourced V8?
Mechanical Repair on the Original Core
The BMW-sourced architecture does not make a complete BMW donor a direct replacement for a Range Rover or Defender. First establish whether the existing block, heads and crank are repairable and which parts fit that specific installation. A contained cylinder-head repair and extensive lubrication damage require different scopes.
If the crank or a casting exceeds its repair limits, the replacement comparison changes. If the measurements support retaining the core, the quotation identifies the necessary machining and OEM replacements. This lets the owner compare restoring a known engine with the condition and compatibility of another unit.
Turbos and Electrified Equipment
The two turbochargers and their oil paths are assessed separately from the core. Smoke after a turbo failure can accompany intake contamination, while a low-pressure event can affect both turbo and internal bearings. The repair record must identify what was exposed and what is retained or renewed.
Any 48V starting or assistance complaint needs the corresponding electrical findings. A mechanical rebuild does not automatically include a new battery, starter-generator or software work. We do not accept hybrid electrical repairs, including work on the battery or starter-generator.
Special Derivatives and a Donor Proposition
On P615, Sport SV or OCTA, identify the recipient specification before comparing a lower-output donor. Request the donor VIN, engine identity and inventory of supplied equipment. The turbo arrangement, cooling, electronics and electrification require an application-specific match, not a decision based on a trim photograph.
If the engine is already removed, provide a list of the parts retained by the original garage. A bare core can be assessed as a mechanical job, but it is not the same proposition as taking responsibility for a complete vehicle with unresolved starting or cooling faults.
4.4 V8 Rebuild Cost and P530 Replacement Cost
4.4 V8 Engine Rebuild Cost
The starting prices above are specific to the 4.4 twin-turbo V8 combustion engine; an AJ133 5.0 price is not interchangeable. The largest cost distinction is between an external fault, repairable local damage and a core that needs wider reconditioning. A misfire with sound compression can have an ignition or fuel cause; low sealing with visible cylinder damage leads to a different mechanical assessment.
For an internal repair, compare the machining, replacement parts and testing included. Turbochargers, injectors and electrical support are separately specified where needed. Removal, refitting, recovery and fluids must also be clear when comparing a removed-core job with a completed car.
P530 Engine Replacement Cost
When the original unit cannot be restored sensibly, a compatible replacement is considered. Its sale price is only one part of the job: donor matching, retained accessories, fitting and correction of the first failure's cause can materially affect the completed cost.
Ask who covers the supplied core and who is responsible for the installation. A donor warranty that excludes transferred equipment differs from cover on an agreed fitted repair. The written quotation should make the boundary understandable before an engine is purchased.
Used Twin-Turbo V8s and Engines for Sale
A search for a 4.4 twin-turbo V8 engine for sale can produce BMW, Range Rover and Defender units with different supporting equipment. We normally assess rebuilding the customer's existing engine first. We do not advertise a standing supply of used P530, SV or OCTA engines.
If you have found a donor, send its advert and identifying details before paying. Request the available oil-pressure, cylinder-condition and running evidence, together with return terms. A lower mileage claim or a clean pallet photograph cannot establish its internal condition or prove that it fits the recipient.
The donor comparison also needs the original failure findings. Installing another core while reusing contaminated oil-path parts or damaged cooling equipment can leave the cause unresolved. On a performance derivative, declared mapping and previous turbo changes belong in the assessment, without assuming that modification caused the fault.
4.4 V8 Engine Problems: Fault Evidence and Repair Route
| Reported complaint | Evidence needed | Possible effect on the quote |
|---|---|---|
| Smoke after a boost complaint | Turbo condition, oil-path inspection and cylinder evidence | Turbo work alone, core work, or both |
| Persistent cylinder misfire | Ignition/fuel tests, compression and leakage findings | External repair or a defined internal repair |
| Coolant loss after overheating | Leak location, pressure retention and sealing checks | Cooling repair or additional head/block assessment |
| Knock with a pressure warning | Lubrication findings, debris and internal measurements | Wider strip and a rebuild-versus-replacement decision |
| Starting fault on an MHEV vehicle | Engine and electrical diagnostic records | Establish whether mechanical work is needed at all |
These are assessment routes, not a list of faults that every P530, SV or OCTA will develop. Request a quote with the diagnostic report and VIN so the proposed work answers the actual complaint.
What a Cylinder or Oil Finding Changes
The first report should distinguish a fault code from a measured defect. A persistent misfire can justify ignition and fuel tests before compression or leakage findings support dismantling. A knock with low pressure requires lubrication and internal measurements; it should not be priced from a smoke complaint alone.
If several systems were damaged, record the order of events. Turbo oil loss followed by low pressure presents different evidence from an internal bearing failure followed by boost trouble. That chronology helps explain which repairs are necessary and which accessories remain serviceable.
Cooling and the Condition of the Core
After overheating, locate the leak and assess cylinder sealing and casting condition. A repaired hose or pump does not establish that the heads survived a severe temperature event. Conversely, an external cooling fault without evidence of internal damage need not become a full V8 rebuild.
Preserve reports and photographs from before dismantling. Parts already renewed and symptoms afterwards can show whether the first repair corrected the original complaint or whether another problem remains.
4.4 Twin-Turbo V8 Reliability After Repair
A meaningful reliability comparison uses the actual service, oil, coolant and repair history of the engine offered. A P530 badge, a newer registration or an SV trim name cannot establish the condition of a particular unit. We do not assign a failure rate to this newer family or apply an older AJ133 timing fault to it.
After a repair, the important evidence is the measured work and the condition of retained equipment. The customer should know which mechanical parts were renewed, which major components remained within limits, and how any oil, cooling or boost fault was addressed. The maintenance requirements then follow the exact vehicle's handbook and repair instructions.
For a donor, ask what testing supported the seller's condition claim. A brief running demonstration is useful but does not replace a report that addresses the failure concerns relevant to your vehicle. Compare that evidence with the written scope for restoring your own engine.
4.4 twin-turbo V8 Models, Engine Codes and Years
| Model | Generation | Years / documented MY reference | Badges | PS | kW* | Layout | Model page |
|---|---|---|---|---|---|---|---|
| Range Rover Sport | L461 | MY2023 launch | P530 twin-turbo V8 | 530 | 390 | Longitudinal | Range Rover Sport |
| Range Rover Sport | L461 | MY2024 SV introduction | SV twin-turbo MHEV V8 | 635 | 467 | Longitudinal | Range Rover Sport |
| Range Rover | L460 | MY2022 P530 / MY2024 SV | P530 / P615 | 530 / 615 | 390 / 452 | Longitudinal | Range Rover |
| Defender | L663 | L663 · 2024 OCTA introduction | OCTA | 635 | 467 | Longitudinal | Defender |
*kW uses the published convention for 339, 350, 380 and 565 PS examples; other figures are whole-number conversions from PS. Combined hybrid output is labelled. Year references identify an application; the VIN and installed code settle fitment.
If your vehicle is described as P540, send the VIN for identification and a specific enquiry. A P530 or P615 specification is not applied to it automatically.
Identifying the 4.4 twin-turbo V8 Before Ordering Parts
Use the VIN and installed engine identification together. P530, P615 and 635 PS SV/OCTA applications have their own component and installation requirements. If the car is described as P540, send its VIN for an individual identification enquiry; another badge's output is not assigned to it.
The recipient and donor details should identify fuel, model generation, electrification and what accessories are supplied. A removed engine needs the same record. This prevents a bare family description from becoming a claim of complete interchange.
4.4 twin-turbo V8 Warranty and Recovery Enquiries
Our rebuilds carry a 12-month unlimited mileage warranty on covered parts and labour. Read the written warranty for the contracted 4.4 twin-turbo V8 work. Give your postcode and explain whether the car starts, rolls or has already been dismantled so recovery and the installed-job scope can be assessed.
Mechanical Work Accepted for Range Rover, Sport and OCTA
We accept mechanical engine work on the later BMW-sourced 4.4 twin-turbo petrol V8 in Range Rover, Range Rover Sport and Defender OCTA. Each installation is quoted individually after identification and inspection. This is not the AJ133 supercharged V8 or 448DT diesel V8. Electrical hybrid repairs are excluded.
Accepted Work and Quote Scope
We accept mechanical engine rebuilding on 48V mild-hybrid vehicles. Plug-in-hybrid vehicles and hybrid electrical-system repairs are not accepted. We normally rebuild your existing engine. If that is uneconomic, we can source and fit a compatible replacement, quoted individually. Turbos and injectors are fitted or replaced alongside engine repairs only, not as standalone jobs.
4.4 twin-turbo V8 FAQs
How much does a 4.4 twin-turbo V8 rebuild cost?
We quote the identified engine and required work after assessment. Published starting amounts apply only to their named model and engine; see own-engine rebuild prices. Removal, refitting and additional equipment are separately identified unless included in writing.
What repair evidence matters most?
Inspect turbo oil supply and return, intake contamination, crankcase ventilation and recorded oil pressure.
Can an external fault explain the complaint?
Cooling-system and heat management: High output produces demanding thermal conditions, but overheating alone does not establish an engine rebuild.
Which similarly named engine must be kept separate?
The 448DT 4.4 is a diesel and never an interchangeable donor. AJ133 is the earlier 5.0 supercharged petrol. A body trim or nominal PS badge is insufficient to identify turbo and hybrid equipment.
What changes the final cost?
The L460 full-size Range Rover and L461 Sport differ from L405/L494 predecessors. Later special-edition names should not be projected backward into the older 5.0 V8 era.
How long will this engine repair take?
The 4.4 twin-turbo V8 job is scheduled around the confirmed variant, damage and machining or parts needs. We give a timescale with the written scope after assessment.
What happens if I have found a used unit?
Send the donor advert and the recipient VIN for a 4.4 twin-turbo V8 compatibility assessment. We usually assess recovering your installed core first; an advertised engine price does not include the complete installation.
Get a 4.4 twin-turbo V8 Engine Quote
We accept mechanical engine work for this installation; the repair specification and parts are confirmed after assessment.
Send the registration, mileage, postcode and fault history. We will identify the 4.4 twin-turbo V8 application and discuss rebuilding the existing engine or an appropriate installed replacement.
Prefer to talk? Call 01268 944339 or WhatsApp 07351 691324.
Speak to Our Engine Rebuild Team
Our specialist technicians bring 15+ years’ experience and 3,200+ engine rebuilds. Our rebuild work carries a 12-month unlimited-mileage warranty on covered components and labour, subject to the written warranty terms and the required chargeable 2,000-mile service. No deposit is required for standard engine work; any advance payment for bespoke parts is agreed separately.
Call 01268 944339, WhatsApp 07351 691324, email info@rangeroverengines.uk, or request a free initial quote.
Workshop: Unit A5, Windsor Road Commercial Estate, Ramsden Heath, Billericay, Essex CM11 1QE. Hours: Monday–Friday 9am–6pm; Saturday 11am–2pm.
Contracting company: JLR Engine Specialists Ltd, company number 16500838. One Billericay workshop; other areas served through collection.