TDV6 and SDV6 Crankshaft Failure Repair
We repair suspected or confirmed damage to the 3.0 V6 diesel crankshaft and bearings. A red pressure warning without confirmed damage belongs first with oil-pressure testing; a fractured crankshaft needs a measured core decision.
Ask about this fault · Vehicle engine options
Repair Cost and What the Quote Covers
For the named Range Rover Sport 306DT 3.0 V6 diesel application, own-engine rebuilding is from £5,000 + VAT (£6,000 inc. VAT at 20%). This is not a chain-only, crankshaft-only or fitted-replacement tariff. We confirm that the actual vehicle matches the application before confirming your quote.
Removal, refitting and recovery are separate; turbochargers, injectors and other ancillaries are excluded unless specified in the written quote. The original crank, block and head condition can change the work beyond a normal rebuild. Compare model-specific rebuild prices.
| Inspection result | Repair decision | Quote scope |
|---|---|---|
| Fault isolated without established core damage | Targeted repair where suitable | Confirm the failed system and required parts |
| Repairable internal damage | Rebuild the original core | Measure, machine and replace specified parts |
| Core not economically serviceable | Compare another suitable unit | Verify identity, condition and installation work |
Crankshaft Fracture Is Not the Same As Bearing Wear
The diagnosis must distinguish damaged shells, journals and housings from an actual fracture. We inspect the parts after an agreed strip and identify which are reusable. The fault description alone cannot establish a replacement crank or block.
Measuring the Original Core
Journal dimensions, cracking and bearing-housing condition determine whether machining or replacement is feasible. We do not promise a regrind before these checks. Available compatible parts and the block condition affect the economic comparison.
Oil Contamination Beyond the Failed Bearing
Debris can affect more than the damaged location. We inspect relevant oil paths and connected equipment, then identify cleaning, testing and replacement work. Changing one shell without dealing with established contamination is not a complete repair plan.
Sport, Range Rover and Discovery Vehicle Work
The same family appears in different vehicles with different access and equipment. We price engine work and the actual removal/refit job separately. Tell us if another garage already has the engine out so we avoid quoting the wrong route.
When Rebuilding Is No Longer Economical
A damaged block, unavailable suitable components or extensive secondary damage can favour another core. We compare a properly identified alternative with the cost of saving yours, without assuming the cheapest advertised unit will fit.
Evidence That Helps Us Quote the Right Job
Send the VIN, installed engine identification, mileage, the sequence before the failure and any oil-pressure or temperature warning. State whether it turns, cranks normally or is mechanically locked. Previous oil/filter findings and a garage report help us distinguish a core inspection from further tests on the vehicle. If it has been opened already, retain the damaged parts and record what was removed.
Diagnostic and Strip-Down Charges
The initial enquiry is free. Our diagnostic fee is typically £99–£149 + VAT (£118.80–£178.80 inc. VAT at 20%), deducted from repair if you proceed. Engine removal or strip-down is separately agreed. Diagnostic booking.
Insured Collection or a Removed Engine
Collection and delivery start from £70 inc. VAT, mileage-priced in advance; pickup is usually within 1–2 working days once booked. We hire recovery with vehicle transit insurance. Removed-engine pallet cover is agreed separately. Vehicle collection · Pallet-engine intake.
Timing Drive Checked for the Actual V6
We identify the affected timing-drive components for the actual engine rather than treating it as the Ingenium chain job. A failed timing component and a failed crankshaft are not interchangeable diagnoses. We do not copy a generic chain-kit service or a petrol VVT parts list into a TDV6 repair quote.
TDV6 Bearing Repair Cost versus a Damaged Core
A worn journal that can be restored, a bearing housing damaged by a spun shell and a fractured crankshaft produce different quotes. We measure the journals and housings and identify contamination before specifying the repair. The work order names the crank solution, bearing specification, oil-system cleaning and any major component that cannot be retained. Vehicle removal and a complete rebuild are not the same price scope as a contained crank repair; we show the distinction before you authorise the job.
TDV6/SDV6 Engine-Out Crankshaft Repair Range
For a serviceable-core crankshaft repair, the workshop's published range is £2,083.33–£3,750 + VAT (£2,500–£4,500 inc. VAT at 20%), including engine-out repair parts and labour. The amount is confirmed after strip-down and depends on crankshaft condition and the required repair. It is not a price for a damaged block, every full rebuild or a supplied replacement engine. RRE transport is separately quoted under our collection terms. We give the applicable repair scope and amount in writing before work proceeds.
Frequently Asked Questions
How Much Does TDV6 and SDV6 Crankshaft Repair Cost?
For the Range Rover Sport 306DT 3.0 V6 diesel application, own-engine rebuilding is from £5,000 + VAT (£6,000 inc. VAT at 20%). That is the starting price for rebuilding your own engine, not a fixed price for every cause of this fault; removal, refitting, recovery and ancillaries are quoted separately.
Can you identify it from the vehicle badge?
We check the VIN and installed engine. For this enquiry the relevant family is 306DT 3.0 V6 diesel; the badge alone does not establish exact compatibility.
Can the original engine always be rebuilt?
No. The condition of the block, crank and head determines what can be retained and whether the work is economic.
Are turbochargers and injectors included?
Only if the written quote explicitly includes their work. They are not automatically part of the base engine rebuild.
Should I send a report from another garage?
Yes. Send the complete findings and details of parts already removed. We explain what evidence can be used and what still needs checking.
How long will the work take?
We agree an expected schedule after identifying the unit, inspection requirements and parts availability. A strip-down finding can change the required work and timing.
More on this engine · Related service
Speak to Our Specialist Technicians
Our specialist technicians have 15+ years’ experience and 3,200+ engine rebuilds. Our rebuild work includes a 12-month unlimited-mileage warranty on covered components and labour, subject to the written warranty terms and the required chargeable 2,000-mile service. No deposit is required for standard engine work; any advance payment for bespoke parts is agreed separately.
Call 01268 944339, WhatsApp 07351 691324, email info@rangeroverengines.uk or request a free initial quote.
Workshop: Unit A5, Windsor Road Commercial Estate, Ramsden Heath, Billericay, Essex CM11 1QE. Hours: Monday–Friday 9am–6pm; Saturday 11am–2pm.
Contracting company: JLR Engine Specialists Ltd (company number 16500838). We operate one workshop at Billericay; other areas are served through arranged collection.