276DT 2.7 TDV6 Diesel Rebuild, Reconditioning and Replacement
The 2.7 TDV6 is a legacy enquiry rather than a primary 2014–2026 new-vehicle engine. We can assess a customer’s existing unit, but whether a rebuild is economical depends on the car and the exact internal damage.
An own-engine rebuild quote identifies the required mechanical work. The pricing policy explains the price basis. If you bring us the vehicle, we quote the full fitted job before booking.
Our specialist technicians have 15+ years' experience rebuilding Land Rover and Jaguar engines · 3,200+ engine rebuilds by our specialist technicians · 12-month unlimited mileage warranty
Own-engine rebuilding and vehicle installation are separate quote scopes. If your vehicle comes to our workshop, we give the full removal, rebuilding and refitting price before booking. Recovery is quoted if required. Turbochargers, injectors and other ancillaries are excluded unless listed in the agreed scope. See how our prices work.
276DT Engines by Vehicle
Identify your model below, then send the VIN to confirm the installed code and the applicable rebuild route.
Discovery 3 276DT
L319 · 2004–2009 era; legacy enquiry · 190 PS · longitudinal
Own-engine rebuilding: Individual quote
View Discovery engines · Quote for Discovery 3 276DT rebuilding
276DT Reconditioning Prices
| Vehicle | Own-engine rebuild price |
|---|---|
| Discovery | Individual quote |
See the rebuild price scope for access labour and excluded equipment.
276DT engine rebuild cost on an older Discovery
This is primarily a Discovery 3 legacy page. The site does not pretend that its 2.7 TDV6 is a new 2014–2026 application. Rebuild value depends on the existing engine, the rest of the vehicle and how long the owner intends to keep it.
We quote 276DT work individually. The later 306DT 3.0 amount cannot be reused. A quotation follows identification and assessment of the block, head, crank and any connected turbo, fuel or cooling damage.
2.7 TDV6 knock, seizure and timing damage
A pressure warning and a heavy knock require stopping use, not repeatedly trying to start the engine. The crank, bearing structure, oil circuit and debris evidence determine what can be recovered. A timing-drive failure instead calls for checking alignment and valve/piston contact before a drive kit alone is quoted.
The Land Rover UK Discovery 3 material documents a 2.7 V6 diesel offering; the exact stamp and recipient equipment still govern parts. Keep the removed filter, drive parts and garage report if the unit is already out. An unidentified bare block is harder to assess than a documented failed engine.
276DT engine for sale versus a measured rebuild
A 2.7 donor advertised for Discovery or older Sport needs complete identification and fitment checks. It is not a 306DT 3.0 replacement. Ask for running evidence, timing-service history, donor VIN and what fuel/turbo equipment is included.
We normally consider repairing the owner's core before taking on the uncertainty of an older used unit. Where the existing engine is irrecoverable, the installed donor route must include fitting and correction of the initiating fault. A low pallet price by itself does not establish the economical option for the vehicle.
276DT Faults: What the Inspection Needs to Establish
Oil pressure and crank damage
A sudden knock or seizure needs the crank, bearings and oil system measured, rather than an assumption that an advertised used 2.7 will fit.
Inspect journals, block and oil pick-up and establish the sequence of warnings.
Timing-drive damage
An overdue or failed drive component may have affected valve timing.
Inspect timing and contact damage; a belt replacement alone cannot correct damaged internal parts.
Turbo, EGR and coolant issues
Smoke, low power or coolant loss may originate outside the engine core.
Test air path, EGR and cooling pressure before recommending a rebuilt engine.
What an Older 2.7 TDV6 Strip Can Establish
A stopped V6 is not automatically an unusable core, but its major components need measurement before the repair is promised. Record crank and bearing damage with the oil-system findings. A pressure event that spread debris can require attention beyond the visibly failed part.
If timing movement is implicated, establish whether the head and cylinders suffered contact damage. Routine timing service and restoring an already damaged engine are different scopes. A previous invoice or verbal service claim should be reviewed with the physical evidence rather than substituted for it.
A 276DT Enquiry With Complete Cost Information
Supply the vehicle identity, engine stamp and state of dismantling. On an older Discovery, the rest of the car and intended ownership can materially change the economic decision. The engine-work price, installation and ancillary corrections all belong in that comparison.
A used 2.7 should have a donor record and condition evidence. The related 3.0 family cannot be selected as a complete match just because it is another older JLR diesel V6. Ask what accessories are included and which original parts would be reused.
The listed 276DT starting price is based on a comparable diesel V6 repair tier; the agreed job depends on inspection of this specific older engine. Parts and machining availability govern the programme after the measured repair or matched replacement scope is agreed.
276DT Timing Drives and a Removed Engine
A timing-related 276DT enquiry should identify which drive was inspected and what evidence supports the diagnosis. The camshaft timing drive and fuel-pump drive serve different functions; a report should not describe every belt concern as the same failure. Their maintenance requirements are established for the actual Discovery rather than inferred from a later 3.0 engine.
If the unit arrived already removed, send the first diagnostic report, the removed parts and photographs showing its state before dismantling. We can then discuss whether it needs a contained timing repair, cylinder-head assessment or wider bottom-end work. Keep the existing parts until the repair route is agreed: missing evidence can make a second opinion harder without proving that the core is unusable.
276DT Models, Engine Codes and Years
| Model | Generation | Years / documented MY reference | Badges | PS | kW* | Layout | Model page |
|---|---|---|---|---|---|---|---|
| Discovery 3 | L319 | 2004–2009 era; legacy enquiry | 2.7 TDV6 | 190 | 140 | Longitudinal | Discovery |
*kW uses the published convention for 339, 350, 380 and 565 PS examples; other figures are whole-number conversions from PS. Combined hybrid output is labelled. Year references identify an application; the VIN and installed code settle fitment.
Identifying the 276DT Before Ordering Parts
Discovery 3 is the principal link from the site’s Discovery page; later Discovery 4 and Discovery 5 3.0 diesels belong under the 306DT or straight-six Ingenium family after verification. Earlier Range Rover Sport applications, if offered, must be treated as selective VIN enquiries.
2.7-litre V6 turbo diesel from older Discovery-era vehicles. Exact PS, turbo configuration and parts depend on the vehicle and installed engine.
For an outstanding safety recall, use the GOV.UK vehicle recall check and ask a JLR retailer about VIN-specific campaigns and service actions. An overseas bulletin does not establish UK eligibility.
276DT Warranty and Recovery Enquiries
Our rebuilds carry a 12-month unlimited mileage warranty on covered parts and labour. Read the written warranty for the contracted 276DT work. Give your postcode and explain whether the car starts, rolls or has already been dismantled so recovery and the installed-job scope can be assessed.
Booking a Selective 2.7 TDV6 Assessment
Send the registration, engine identity, mileage and fault chronology with any compression, pressure or strip findings. Keep removed parts available if another garage opened the engine. That evidence allows the enquiry to progress from a broad replacement search toward a measured repair or donor comparison.
The owner should receive the proposed scope, installation responsibility and written warranty before work is authorised. It should explain what made the original recoverable or irrecoverable and how any external cause is addressed. This is a selective legacy service, so a fixed amount or turnaround from a newer diesel is not promised.
An older Sport with a 2.7 diesel
Older Range Rover Sport 2.7 enquiries can be considered selectively after identification. The Discovery 3 page is the principal link here, but a model label should not prevent a properly identified owner asking about the same broad family. Its accessories and installation still need matching to the recipient.
The site's main newer-vehicle window does not turn this into a modern-engine offer. It gives an older owner a clear enquiry route with realistic core, donor and ancillary questions. A decision to rebuild should reflect the vehicle's condition and intended ownership, together with the measurements. A firm quote then states what is being restored and which connected faults are addressed.
The free initial enquiry identifies the likely 2.7 application and the information needed next. Any workshop diagnosis, strip work or recovery is agreed separately before authorisation. If the inspected unit is not a sensible rebuild candidate, the explanation and replacement comparison are provided before further repair commitments are made.
Selective Legacy Engine Rebuilding Accepted
We accept selective 276DT 2.7 TDV6 diesel rebuilding enquiries. These older applications are outside the core 2014-onward vehicle window. We assess the condition of the original engine, vehicle and required parts before agreeing the work. Rebuilding and a compatible sourced-and-fitted replacement are quoted individually; a tariff for another family is not transferred.
Accepted Work and Quote Scope
We accept mechanical engine rebuilding on 48V mild-hybrid vehicles. Plug-in-hybrid vehicles and hybrid electrical-system repairs are not accepted. We normally rebuild your existing engine. If that is uneconomic, we can source and fit a compatible replacement, quoted individually. Turbos and injectors are fitted or replaced alongside engine repairs only, not as standalone jobs.
276DT FAQs
How much does a 276DT rebuild cost?
We quote the identified engine and required work after assessment. Published starting amounts apply only to their named model and engine; see own-engine rebuild prices. Removal, refitting and additional equipment are separately identified unless included in writing.
What repair evidence matters most?
Inspect journals, block and oil pick-up and establish the sequence of warnings.
Can an external fault explain the complaint?
Timing-drive damage: An overdue or failed drive component may have affected valve timing.
Which similarly named engine must be kept separate?
The 276DT is not a 306DT even though both are V6 diesels in the broad older JLR ecosystem. Differences in displacement, crank, boost and installation prevent a direct donor assumption.
What changes the final cost?
This legacy page is deliberately narrower than a main current engine page. A repair decision should compare the documented complete job with the customer’s vehicle rather than advertise a blanket low price.
How long will this engine repair take?
The 276DT job is scheduled around the confirmed variant, damage and machining or parts needs. We give a timescale with the written scope after assessment.
What happens if I have found a used unit?
Send the donor advert and the recipient VIN for a 276DT compatibility assessment. We usually assess recovering your installed core first; an advertised engine price does not include the complete installation.
Get a 276DT Engine Quote
Send the registration, mileage, postcode and fault history. We will identify the 276DT application and discuss rebuilding the existing engine or an appropriate installed replacement.
Prefer to talk? Call 01268 944339 or WhatsApp 07351 691324.
Speak to Our Engine Rebuild Team
Our specialist technicians bring 15+ years’ experience and 3,200+ engine rebuilds. Our rebuild work carries a 12-month unlimited-mileage warranty on covered components and labour, subject to the written warranty terms and the required chargeable 2,000-mile service. No deposit is required for standard engine work; any advance payment for bespoke parts is agreed separately.
Call 01268 944339, WhatsApp 07351 691324, email info@rangeroverengines.uk, or request a free initial quote.
Workshop: Unit A5, Windsor Road Commercial Estate, Ramsden Heath, Billericay, Essex CM11 1QE. Hours: Monday–Friday 9am–6pm; Saturday 11am–2pm.
Contracting company: JLR Engine Specialists Ltd, company number 16500838. One Billericay workshop; other areas served through collection.