3.0 Ingenium Straight-Six Diesel Rebuild, Reconditioning and Replacement
The modern 3.0 Ingenium diesel is a straight-six with 48V mild-hybrid support. It is distinct from the older TDV6/SDV6, although both can appear in searches for D300. We identify the vehicle generation and engine before discussing rebuild cost.
Own-engine rebuilding: Individual quote
An own-engine rebuild quote identifies the required mechanical work. The pricing policy explains the price basis. If you bring us the vehicle, we quote the full fitted job before booking.
Our specialist technicians have 15+ years' experience rebuilding Land Rover and Jaguar engines · 3,200+ engine rebuilds by our specialist technicians · 12-month unlimited mileage warranty
Own-engine rebuilding and vehicle installation are separate quote scopes. If your vehicle comes to our workshop, we give the full removal, rebuilding and refitting price before booking. Recovery is quoted if required. Turbochargers, injectors and other ancillaries are excluded unless listed in the agreed scope. See how our prices work.
3.0 Ingenium diesel Engines by Vehicle
Identify your model below, then send the VIN to confirm the installed code and the applicable rebuild route.
Range Rover Sport 3.0 Ingenium diesel
L494 · L494 / L461 · MY2021 onward family · 249 / 300 / 350 PS · longitudinal
Own-engine rebuilding: from £7,000 + VAT (£8,400 inc. VAT at 20%)
View Range Rover Sport engines · Quote for Range Rover Sport 3.0 Ingenium diesel rebuilding
Range Rover 3.0 Ingenium diesel
L405 · MY2021 introduction; L460 · launch family · 249 / 300 / 350 PS · longitudinal
Own-engine rebuilding: from £6,000 + VAT (£7,200 inc. VAT at 20%)
View Range Rover engines · Quote for Range Rover 3.0 Ingenium diesel rebuilding
Range Rover Velar 3.0 Ingenium diesel
L560 · MY2021 introduction · 300 PS · longitudinal
Own-engine rebuilding: Individual quote
View Range Rover Velar engines · Quote for Range Rover Velar 3.0 Ingenium diesel rebuilding
Defender 3.0 Ingenium diesel
L663 · MY2021 introduction; L663 · MY2025 update · 200 / 249 / 300 / 350 PS · longitudinal
Own-engine rebuilding: from £6,000 + VAT (£7,200 inc. VAT at 20%)
View Defender engines · Quote for Defender 3.0 Ingenium diesel rebuilding
Discovery 3.0 Ingenium diesel
L462 · MY2021 update; L462 · MY2025 update · 249 / 300 / 350 PS · longitudinal
Own-engine rebuilding: from £5,000 + VAT (£6,000 inc. VAT at 20%)
View Discovery engines · Quote for Discovery 3.0 Ingenium diesel rebuilding
Jaguar F-Pace 3.0 Ingenium diesel
X761 · MY2021 introduction · 300 PS · longitudinal
Own-engine rebuilding: Individual quote
View Jaguar F-Pace engines · Quote for Jaguar F-Pace 3.0 Ingenium diesel rebuilding
3.0 Ingenium diesel Reconditioning Prices
| Vehicle | Own-engine rebuild price |
|---|---|
| Range Rover Sport | from £7,000 + VAT (£8,400 inc. VAT at 20%) |
| Range Rover | from £6,000 + VAT (£7,200 inc. VAT at 20%) |
| Range Rover Velar | Individual quote |
| Defender | from £6,000 + VAT (£7,200 inc. VAT at 20%) |
| Discovery | from £5,000 + VAT (£6,000 inc. VAT at 20%) |
| Jaguar F-Pace | Individual quote |
See the rebuild price scope for access labour and excluded equipment.
D250, D300 and D350 engine rebuild cost
These badges describe the newer straight-six diesel group, not the older V6. JLR's MY2021 Range Rover announcement lists D250 at 249 PS, D300 at 300 PS and D350 at 350 PS. Defender, Discovery, Sport, Velar and F-Pace introductions and derivatives differ, so the exact model/year matters before a price is selected.
The listed amount for a Sport is distinct from Discovery or full-size Range Rover. We quote Velar six-cylinder work individually; a diesel amount is not applied to a petrol job.
Straight-six mechanical damage and 48V diagnosis
A diesel-core rebuild should follow evidence of internal damage, not just an MHEV warning. Low oil pressure, a substantial knock or seizure prompts lubrication and rotating-component assessment; a charging or starter-generator fault needs its own electrical diagnosis. Both systems can be involved, but their scopes remain distinguishable.
If the car stopped abruptly, preserve the dashboard messages, fault records and removed oil filter. Repeated cranking can increase damage and erase the useful distinction between the first symptom and what happened afterward. An initial quote can set a route, while measured crank, block and head condition determines the firm repair.
Diesel boost, coolant and oil evidence
A reduced-power D350 can have air-path, fuel, emissions or cooling issues while its basic mechanical core remains sound. Boost logs and pressure tests should be assessed against compression and oil-pressure evidence. A turbo concern does not mean a pair of replacement turbos is automatically included with the reconditioned engine.
Fuel dilution remains a hypothesis until the oil and diesel-system evidence support it. Explain any repeated regeneration warnings and the oil-change intervals. Where a connected component contributed to a failure, the rebuild scope needs to correct that component or explain why it remains outside the contracted work.
D300 engine for sale: V6 or Ingenium I6?
This is the most consequential badge collision for a replacement buyer. An earlier F-Pace or Velar D300 can be a V6; a later one can be an Ingenium straight-six. A correct nominal output will not make the wrong architecture fit. Compare the recipient and donor VINs before considering purchase.
We assess the existing engine first. A donor's external presentation cannot establish its internal history or whether the installation includes the correct 48V support. A warranty on a bare unit and cover for the completed fitted job are different commercial arrangements.
3.0 Ingenium diesel Faults: What the Inspection Needs to Establish
Oil-pressure warning and bottom-end noise
Low pressure or knocking requires immediate cessation of driving and a controlled inspection. The cause can lie in oil supply, contamination or damaged bearings.
Record the sequence of warnings; inspect oil filter, pick-up and measured crank/bearing condition before a rebuild estimate.
Aftertreatment and fuel dilution
Repeated DPF interruptions or fuel-delivery faults may alter oil condition, but cannot be assigned as the cause without inspection.
Review regeneration and injector data and inspect the oil before making a mechanical-failure claim.
Boosting, cooling and 48V diagnosis
Reduced power, coolant loss and mild-hybrid faults can mimic or accompany a mechanical failure. A full engine replacement will not necessarily fix a control-system problem.
Separate air-path, coolant pressure, mechanical compression and 48V fault tests before deciding the route.
D350 and D300 I6: Measurements Before a Donor Decision
Once an internal diesel failure is confirmed, record the condition of the crank, bearings, head and cylinder surfaces. An engine that cannot rotate may require a different strip plan from one that still runs with a pressure warning. Damage to one component does not establish that every casting is unusable, and an apparently intact casting does not prove it remains within repair limits.
If another workshop has opened the engine, obtain its measurements rather than only the conclusion “needs replacing”. Those findings can support a recoverable-core proposal or explain why another core is required. We do not promise a machining process for every seized six-cylinder before the damaged component is assessed.
The oil circuit and connected equipment deserve attention when bearing material or contamination is present. Reusing a defective supply component can affect a repaired engine. The full scope should explain what happened to the turbo, fuel and cooling systems where the evidence made them relevant.
The Installed Price of a Modern Diesel Six
Discovery, Defender and the two Range Rover platforms have separate vehicle-specific labour and equipment requirements. A supplied engine-work amount does not establish a universal removal time or complete installed price. State whether the recipient is complete, partially dismantled or awaiting a donor, so the contract reflects responsibility for the finished vehicle.
Check whether an advertised D300 belongs to the V6 or straight-six era and whether it includes the matching 48V equipment. A seller's calibration badge is not a donor VIN. The 249 PS D250 designation and later output revisions also need precise vehicle matching rather than a family-wide assumption.
After diagnosis, the written price should let the owner compare core work, installation and ancillary correction on equal terms. It should identify the applicable warranty and a parts-based timescale without pretending that newer model years eliminate every mechanical or electrical fault.
F-Pace D300, Defender D350 and a Diesel-Six Quote
F-Pace MY2021 D300 Versus the Earlier V6
The updated F-Pace D300 uses a 300 PS straight-six diesel with mild-hybrid assistance. The earlier D300 was a V6 in the 306DT family. Knowing that distinction prevents a correct-looking badge from sending the wrong replacement unit or parts to the vehicle.
Provide the VIN and the first fault report, especially if another garage has described the problem only as a D300 failure. The oil, boosting and cylinder findings should support the proposed core repair. A diesel aftertreatment warning or an assisted-starting fault does not establish crank or bearing damage on its own.
Defender D300 and D350
The later Defender diesel-six variants are distinguished from its launch four-cylinder diesels. D350 replaced D300 for the MY2025 update. The vehicle's exact revision determines the quoted parts and installed-job scope; a shared inline-six architecture does not establish complete donor interchange.
If the car stopped after a pressure warning, tell us what happened before recovery and whether it has since been cranked. If it still runs but is in restricted performance, supply the fault and boost data already recorded. Those are different starting points for deciding whether internal engine work is required.
3.0 Ingenium diesel Models, Engine Codes and Years
| Model | Generation | Years / documented MY reference | Badges | PS | kW* | Layout | Model page |
|---|---|---|---|---|---|---|---|
| Range Rover Sport | L494 | L494 / L461 · MY2021 onward family | D250 diesel | 249 | 183 | Longitudinal | Range Rover Sport |
| Range Rover Sport | L494 | L494 / L461 · MY2021 onward family | D300 diesel | 300 | 221 | Longitudinal | Range Rover Sport |
| Range Rover Sport | L494 | L494 / L461 · MY2021 onward family | D350 diesel | 350 | 258 | Longitudinal | Range Rover Sport |
| Range Rover | L405 | L405 · MY2021 introduction | D250 | 249 | 183 | Longitudinal | Range Rover |
| Range Rover | L405 | L405 · MY2021 introduction | D300 | 300 | 221 | Longitudinal | Range Rover |
| Range Rover | L405 | L405 · MY2021 introduction | D350 | 350 | 258 | Longitudinal | Range Rover |
| Range Rover | L460 | L460 · launch family | D250 | 249 | 183 | Longitudinal | Range Rover |
| Range Rover | L460 | L460 · launch family | D300 | 300 | 221 | Longitudinal | Range Rover |
| Range Rover | L460 | L460 · launch family | D350 | 350 | 258 | Longitudinal | Range Rover |
| Range Rover Velar | L560 | L560 · MY2021 introduction | D300 later | 300 | 221 | Longitudinal | Range Rover Velar |
| Defender | L663 | L663 · MY2021 introduction | D200 | 200 | 147 | Longitudinal | Defender |
| Defender | L663 | L663 · MY2021 introduction | D250 | 249 | 183 | Longitudinal | Defender |
| Defender | L663 | L663 · MY2021 introduction | D300 | 300 | 221 | Longitudinal | Defender |
| Defender | L663 | L663 · MY2025 update | D350 | 350 | 258 | Longitudinal | Defender |
| Discovery | L462 | L462 · MY2021 update | D250 | 249 | 183 | Longitudinal | Discovery |
| Discovery | L462 | L462 · MY2021 update | D300 | 300 | 221 | Longitudinal | Discovery |
| Discovery | L462 | L462 · MY2025 update | D350 | 350 | 258 | Longitudinal | Discovery |
| Jaguar F-Pace | X761 | MY2021 introduction; later variant by VIN | D300 straight-six MHEV | 300 | 221 | Longitudinal | Jaguar F-Pace |
*kW uses the published convention for 339, 350, 380 and 565 PS examples; other figures are whole-number conversions from PS. Combined hybrid output is labelled. Year references identify an application; the VIN and installed code settle fitment.
Identifying the 3.0 Ingenium diesel Before Ordering Parts
JLR introduced 249/300/350 PS straight-six diesel outputs on the Range Rover for MY2021 and D200/D250/D300 on the Defender. Discovery, Sport, Velar and F-Pace derivatives must be checked separately for UK year, output and code.
3.0-litre inline-six Ingenium diesel. JLR’s MY2021 Range Rover release gives D250 249 PS, D300 300 PS and D350 350 PS. Published kW for D350 varies by release; page table uses badges only pending exact variant lookup.
For an outstanding safety recall, use the GOV.UK vehicle recall check and ask a JLR retailer about VIN-specific campaigns and service actions. An overseas bulletin does not establish UK eligibility.
3.0 Ingenium diesel Warranty and Recovery Enquiries
Our rebuilds carry a 12-month unlimited mileage warranty on covered parts and labour. Read the written warranty for the contracted 3.0 Ingenium diesel work. Give your postcode and explain whether the car starts, rolls or has already been dismantled so recovery and the installed-job scope can be assessed.
Modern Diesel-Six Reliability and Parts Identity
A D350 badge identifies an output category, not a guaranteed condition or one universally interchangeable unit. Some published kW figures also vary by source convention. The table labels its conversion method; the exact vehicle's documentation and parts record are used when selecting hardware.
For a used-car or donor assessment, inspect the actual service and fault history instead of assuming every later engine cured every earlier diesel concern. Oil, cooling and aftertreatment evidence should be considered alongside mechanical tests. A good warm-running demonstration does not establish the absence of a cold-start or restart complaint.
Quote revisions after strip inspection
Explain which newly measured component changed the scope and whether it affects the available repair route. A price based on a usable head or crank is a different offer from one needing a major replacement. The owner should be able to compare those findings with a donor proposal rather than receive an unexplained change in price.
The car-specific installation, 48V diagnosis and ancillary correction are agreed with the core work. State any component left outside the contract, particularly where a defect in it was implicated in failure. This creates a meaningful completed-job comparison without advertising a blanket three-litre diesel tariff.
Accepted Work and Quote Scope
We accept mechanical engine rebuilding on 48V mild-hybrid vehicles. Plug-in-hybrid vehicles and hybrid electrical-system repairs are not accepted. We normally rebuild your existing engine. If that is uneconomic, we can source and fit a compatible replacement, quoted individually. Turbos and injectors are fitted or replaced alongside engine repairs only, not as standalone jobs.
Own-Engine Rebuild Starting Prices
These amounts cover rebuilding your own engine. Removal, refitting and recovery are separately quoted; turbos, injectors and other ancillaries are excluded unless named in writing. Exact application and damage are confirmed before work.
| Model | Engine family | Own-engine rebuilding |
|---|---|---|
| Defender | ingenium 3 0 diesel engine | from £6,000 + VAT (£7,200 inc. VAT at 20%) |
| Discovery | ingenium 3 0 diesel engine | from £5,000 + VAT (£6,000 inc. VAT at 20%) |
| Range Rover | ingenium 3 0 diesel engine | from £6,000 + VAT (£7,200 inc. VAT at 20%) |
| Range Rover Sport | ingenium 3 0 diesel engine | from £7,000 + VAT (£8,400 inc. VAT at 20%) |
3.0 Ingenium diesel FAQs
How much does a 3.0 Ingenium diesel rebuild cost?
We quote the identified engine and required work after assessment. Published starting amounts apply only to their named model and engine; see own-engine rebuild prices. Removal, refitting and additional equipment are separately identified unless included in writing.
What repair evidence matters most?
Record the sequence of warnings; inspect oil filter, pick-up and measured crank/bearing condition before a rebuild estimate.
Can an external fault explain the complaint?
Aftertreatment and fuel dilution: Repeated DPF interruptions or fuel-delivery faults may alter oil condition, but cannot be assigned as the cause without inspection.
Which similarly named engine must be kept separate?
A D300 from the previous V6 era belongs on the 306DT page; the later D300 straight-six belongs here. D350 and D250 are outputs, not permission to interchange whole engines.
What changes the final cost?
The 2020 announcement for MY2021 is a transition point on the Range Rover and Defender, not a universal VIN cut-over for all JLR models. The later D350 update must be confirmed by vehicle.
How long will this engine repair take?
The 3.0 Ingenium diesel job is scheduled around the confirmed variant, damage and machining or parts needs. We give a timescale with the written scope after assessment.
What happens if I have found a used unit?
Send the donor advert and the recipient VIN for a 3.0 Ingenium diesel compatibility assessment. We usually assess recovering your installed core first; an advertised engine price does not include the complete installation.
Get a 3.0 Ingenium diesel Engine Quote
Send the registration, mileage, postcode and fault history. We will identify the 3.0 Ingenium diesel application and discuss rebuilding the existing engine or an appropriate installed replacement.
Prefer to talk? Call 01268 944339 or WhatsApp 07351 691324.
Speak to Our Engine Rebuild Team
Our specialist technicians bring 15+ years’ experience and 3,200+ engine rebuilds. Our rebuild work carries a 12-month unlimited-mileage warranty on covered components and labour, subject to the written warranty terms and the required chargeable 2,000-mile service. No deposit is required for standard engine work; any advance payment for bespoke parts is agreed separately.
Call 01268 944339, WhatsApp 07351 691324, email info@rangeroverengines.uk, or request a free initial quote.
Workshop: Unit A5, Windsor Road Commercial Estate, Ramsden Heath, Billericay, Essex CM11 1QE. Hours: Monday–Friday 9am–6pm; Saturday 11am–2pm.
Contracting company: JLR Engine Specialists Ltd, company number 16500838. One Billericay workshop; other areas served through collection.