D300 and D350 Straight-Six Diesel Failure Repair

D300 and D350 straight-six diesel enquiries are assessed by vehicle, year and fault evidence. D300 is also used on earlier V6 applications, so the badge alone cannot identify the engine covered by this page.

Ask about this fault · Vehicle engine options

Repair Cost and What the Quote Covers

For the named Defender 3.0 Ingenium straight-six diesel application, own-engine rebuilding is from £6,000 + VAT (£7,200 inc. VAT at 20%). This is not a chain-only, crankshaft-only or fitted-replacement tariff. We confirm that the actual vehicle matches the application before confirming your quote.

Removal, refitting and recovery are separate; turbochargers, injectors and other ancillaries are excluded unless specified in the written quote. The original crank, block and head condition can change the work beyond a normal rebuild. Compare model-specific rebuild prices.

Inspection resultRepair decisionQuote scope
Fault isolated without established core damageTargeted repair where suitableConfirm the failed system and required parts
Repairable internal damageRebuild the original coreMeasure, machine and replace specified parts
Core not economically serviceableCompare another suitable unitVerify identity, condition and installation work

Confirm That D300 Means the Straight-six

We use the VIN, build details and actual engine rather than a badge search. Earlier V6 and later straight-six enquiries must remain separate. This page concerns the later Ingenium diesel family, not every car advertised as D300.

Powertrain Warnings versus Internal Engine Damage

We read the event and system evidence before recommending mechanical work. Sensor, emissions or mild-hybrid faults do not automatically establish a damaged combustion engine. The scope is agreed for the system actually affected.

Pressure, Noise and Non-turning Complaints

If the engine knocks or will not rotate, avoid further starts and tell us the sequence. Oil-pressure evidence and component inspection determine whether a core repair is needed. We do not diagnose a crankshaft from a warning message alone.

Defender, Range Rover, Sport and Discovery

These vehicles use different output and installation combinations. The exact application determines parts, access and the applicable repair quote. We never transfer a Discovery base amount to a Sport as a family-wide offer.

Repair Decision on a Newer Vehicle

Provide existing warranty or retailer instructions before authorising a strip. We establish the mechanical enquiry and acceptance scope before work. Rebuilding is proposed only when the findings and the required installation work make it a suitable option.

Evidence That Helps Us Quote the Right Job

Include the VIN and existing diagnostic report, not just a badge description. We need to know when the noise or warning appeared, whether oil level changed and what work was done previously. A phone video can describe a noise, but it cannot establish the dimensions or condition of parts inside the engine. Tell us if another garage has removed covers or the entire unit.

Diagnostic and Strip-Down Charges

The initial enquiry is free. Our diagnostic fee is typically £99–£149 + VAT (£118.80–£178.80 inc. VAT at 20%), deducted from repair if you proceed. Engine removal or strip-down is separately agreed. Diagnostic booking.

Insured Collection or a Removed Engine

Collection and delivery start from £70 inc. VAT, mileage-priced in advance; pickup is usually within 1–2 working days once booked. We hire recovery with vehicle transit insurance. Removed-engine pallet cover is agreed separately. Vehicle collection · Pallet-engine intake.

D300 and D350 Repair: Mechanical Fault or Supporting System?

A diesel powertrain message can involve engine management, emissions equipment or mild-hybrid support; it does not prove that the internal diesel assembly has failed. We work from the event history and diagnostic evidence to decide whether mechanical pressure, compression or further core inspection is justified. An active knock or pressure warning remains a reason to stop operation. Your quote separates the established engine work from connected-system tasks instead of replacing a core to address an unconfirmed warning.

Mechanical Engine Work and Vehicle Scope

We accept mechanical engine rebuilding on 48V mild-hybrid vehicles. We do not accept plug-in-hybrid vehicles or hybrid electrical-system repairs.

D300 and D350 Reliability Questions

A badge or a collection of online reports cannot establish the condition of an individual engine. We assess its service and failure history, installed engine identity and diagnostic findings. Earlier V6 and later straight-six D300 applications are different families. Mechanical work on the later mild-hybrid engine is accepted; hybrid electrical repairs are not.

Frequently Asked Questions

How Much Does D300 and D350 Straight-Six Diesel Repair Cost?

For the Defender 3.0 Ingenium straight-six diesel application, own-engine rebuilding is from £6,000 + VAT (£7,200 inc. VAT at 20%). That is the starting price for rebuilding your own engine, not a fixed price for every cause of this fault; removal, refitting, recovery and ancillaries are quoted separately.

Can you identify it from the vehicle badge?

We check the VIN and installed engine. For this enquiry the relevant family is 3.0 Ingenium straight-six diesel; the badge alone does not establish exact compatibility.

Can the original engine always be rebuilt?

No. The condition of the block, crank and head determines what can be retained and whether the work is economic.

Are turbochargers and injectors included?

Only if the written quote explicitly includes their work. They are not automatically part of the base engine rebuild.

Should I send a report from another garage?

Yes. Send the complete findings and details of parts already removed. We explain what evidence can be used and what still needs checking.

How long will the work take?

We agree an expected schedule after identifying the unit, inspection requirements and parts availability. A strip-down finding can change the required work and timing.

More on this engine · Related service

Speak to Our Specialist Technicians

Our specialist technicians have 15+ years’ experience and 3,200+ engine rebuilds. Our rebuild work includes a 12-month unlimited-mileage warranty on covered components and labour, subject to the written warranty terms and the required chargeable 2,000-mile service. No deposit is required for standard engine work; any advance payment for bespoke parts is agreed separately.

Call 01268 944339, WhatsApp 07351 691324, email info@rangeroverengines.uk or request a free initial quote.

Workshop: Unit A5, Windsor Road Commercial Estate, Ramsden Heath, Billericay, Essex CM11 1QE. Hours: Monday–Friday 9am–6pm; Saturday 11am–2pm.

Contracting company: JLR Engine Specialists Ltd (company number 16500838). We operate one workshop at Billericay; other areas are served through arranged collection.