Range Rover L405 Engine Rebuilding, Repair and Replacement Cost

We assess and rebuild the engine you own in a Range Rover L405, focusing on vehicles in the 2014–2022 window. We identify the generation and installed unit before selecting parts. See the full Range Rover engine range for the wider vehicle range. We confirm the VIN, build details and installed engine before agreeing parts and price.

Get a quote for your Range Rover L405

Range Rover L405 Engine Rebuild Options and Starting Prices

Scope: rebuilding your own engine only. Removal, refitting and recovery are separate; turbos, injectors and other ancillaries are excluded unless named in the written quote. The VIN and installed variant determine which engine route applies to your car.

Engine enquiryIdentificationOwn-engine rebuild
306DT 3.0 V6 dieselVIN and installed variantfrom £4,500 + VAT (£5,400 inc. VAT at 20%)
448DT 4.4 SDV8 dieselVIN and installed variantIndividual quote
AJ126 3.0 supercharged V6 petrolVIN and installed variantIndividual quote
AJ133 5.0 V8 petrolVIN and installed variantfrom £7,000 + VAT (£8,400 inc. VAT at 20%)
3.0 Ingenium straight-six dieselVIN and installed variantfrom £6,000 + VAT (£7,200 inc. VAT at 20%)
3.0 Ingenium straight-six petrolVIN and installed variantIndividual quote

The table prices own-engine work for the named model/family. We confirm the installed unit and give the vehicle total, including any separately required installation or ancillary work, before you approve the repair.

Vogue, Autobiography and Long-wheelbase Identity

Vogue and Autobiography identify specification, not one engine. Long-wheelbase bodywork does not establish the installed powertrain either. We use the VIN and actual engine to quote the job rather than assigning a price from the trim name.

Earlier V6 Diesel and Later Straight-six

The L405 spans the V6 diesel era and later straight-six applications. A D300 badge must be read with the model year and unit. Their parts and scope remain separate, even when an owner simply describes a 3.0 diesel.

4.4 Diesel versus 5.0 Petrol

The SDV8 diesel and AJ133 petrol V8 are distinct enquiries with different fuel, timing and ancillary systems. We record the actual engine and damage before deciding between a contained repair and a rebuild.

Repair, Rebuild or a Compatible Replacement?

For a Range Rover L405 with a running fault, diagnosis can remain narrower than rebuilding. Timing noise, oil-pressure loss and coolant symptoms must be assessed on their own evidence. We separate an electrical or ancillary cause from measured internal wear. A head, crankshaft or block finding then establishes whether the original engine can be saved and which components the written quote needs to cover.

FindingWork to compareRelevant service
Noise or warning without established internal damageDiagnosis and a targeted repairEngine diagnostics
Repairable head, timing or bearing damageDefined work on the original unitRebuild pricing
Unserviceable major coreWider core work or suitable alternativeWritten quote process

Arrange Your Vehicle or Removed-Engine Assessment

Send the registration, VIN, engine identity and existing report. We agree the diagnostic or strip-down scope before work. A vehicle and a removed core need different intake and fitting arrangements. Diagnostics · Removed-engine intake · Insured collection.

L405 Reconditioned Engine Cost: Match the Diesel Era

A V6 SDV6 enquiry and the later straight-six diesel need different parts, even though both belong to the same full-size Range Rover generation. We use the build details and installed unit with the fault report before confirming a quote. For an original engine that can be retained, we explain the core work and any separate turbo, fuel or cooling repair. The vehicle total also depends on removal, refitting and transport; Vogue or Autobiography specification alone does not determine those engine costs.

Straight-Six Diesel: Separate the Mechanical Fault

D300 and D350 identify outputs, not a universal parts interchange. Earlier V6 D300 and later straight-six applications must be kept separate. We assess timing, lubrication and internal mechanical findings for the installed engine; 48V electrical faults are outside our repair scope.

Petrol Engine Identification and Repair Findings

The engine identity and installation are confirmed before parts are ordered. Misfire, cooling and boost symptoms need checks of their own; they are not proof that a complete rebuild is necessary. We compare a targeted repair with rebuilding the original core after the mechanical findings are established.

4.4 SDV8: Diagnose the V8 Diesel Installation

The 448DT diesel is separate from the later 4.4 twin-turbo petrol V8. Low oil pressure, bearing damage and turbo-related contamination need a defined inspection route. The condition of the original core and the attached equipment determine what can be rebuilt and which additional components must be priced separately.

Supercharged V8: Internal Damage or Attached Equipment

A supercharger or cooling complaint does not by itself establish damage to the block, bearings or bores. We separate those findings before defining the rebuild. The precise output and installation determine the parts match; an SVR or XJR badge is not a universal exchange-unit specification.

V6 Diesel: Bearings, Oil Pressure and Timing

A heavy knock, oil-pressure warning or sudden stop needs a different investigation from a cooling or timing complaint. We inspect the crankshaft, bearings and reusable core where bottom-end damage is suspected. Timing work follows the installed V6 diesel specification, not an Ingenium chain assumption. The vehicle installation and complete written scope matter as much as the family name.

Frequently Asked Questions

Does Vogue or Autobiography tell you which engine is fitted?

No. They are specification names; we confirm the VIN, build details and actual engine before quoting.

Is every L405 D300 a V6 diesel?

No. The generation spans different diesel eras. We identify the installed unit before applying a V6 or straight-six route.

Do you accept plug-in-hybrid vehicles?

No. We do not accept plug-in-hybrid engine or electrical work. Mechanical engine work on 48V mild-hybrid vehicles is a separate, accepted service; hybrid electrical repairs are excluded.

Does the Range Rover engine amount include refitting?

The quoted engine amount covers the named own-engine work. Vehicle removal, refitting, recovery and separately required ancillary work are itemised for the actual installation.

Can my garage send this engine for bench work?

Yes, by prior arrangement. We agree the unit identity, inventory and return specification, while your garage retains the stated installation responsibilities.

When can you confirm the completion date?

We discuss the expected sequence after identifying this unit, its inspection findings and necessary parts. Further damage or unavailable components can alter the schedule.

Speak to Our Specialist Technicians

Our specialist technicians have 15+ years’ experience and 3,200+ engine rebuilds. Our rebuild work includes a 12-month unlimited-mileage warranty on covered components and labour, subject to the written warranty terms and the required chargeable 2,000-mile service. No deposit is required for standard engine work; any advance payment for bespoke parts is agreed separately.

Call 01268 944339, WhatsApp 07351 691324, email info@rangeroverengines.uk or request a free initial quote.

Workshop: Unit A5, Windsor Road Commercial Estate, Ramsden Heath, Billericay, Essex CM11 1QE. Hours: Monday–Friday 9am–6pm; Saturday 11am–2pm.

TDV6 and SDV6 Crankshaft Failure Repair · Discovery 4 3.0 Diesel Engine Failure Repair · Range Rover Sport L494 Engine Failure Repair

Contracting company: JLR Engine Specialists Ltd (company number 16500838). We operate one workshop at Billericay; other areas are served through arranged collection.