Range Rover Sport L494 Engine Rebuilding, Repair and Replacement Cost

We assess and rebuild the engine you own in a Range Rover Sport L494, focusing on vehicles in the 2014–2022 window. We identify the generation and installed unit before selecting parts. See the full Range Rover Sport engine range for the wider vehicle range. We confirm the VIN, build details and installed engine before agreeing parts and price.

Get a quote for your Range Rover Sport L494

Range Rover Sport L494 Engine Rebuild Options and Starting Prices

Scope: rebuilding your own engine only. Removal, refitting and recovery are separate; turbos, injectors and other ancillaries are excluded unless named in the written quote. The VIN and installed variant determine which engine route applies to your car.

Engine enquiryIdentificationOwn-engine rebuild
306DT 3.0 V6 dieselVIN and installed variantfrom £5,000 + VAT (£6,000 inc. VAT at 20%)
204DTA 2.0 high-output Ingenium dieselVIN and installed variantIndividual quote
448DT 4.4 SDV8 dieselVIN and installed variantIndividual quote
AJ126 3.0 supercharged V6 petrolVIN and installed variantIndividual quote
AJ133 5.0 V8 petrolVIN and installed variantfrom £7,000 + VAT (£8,400 inc. VAT at 20%)
2.0 Ingenium petrolVIN and installed variantIndividual quote
3.0 Ingenium straight-six dieselVIN and installed variantfrom £7,000 + VAT (£8,400 inc. VAT at 20%)
3.0 Ingenium straight-six petrolVIN and installed variantIndividual quote

The table prices own-engine work for the named model/family. We confirm the installed unit and give the vehicle total, including any separately required installation or ancillary work, before you approve the repair.

SDV6 and TDV6 Rebuilding

The earlier 3.0 V6 diesel is assessed for core condition and any timing or lubrication damage. Vehicle labour is specified for the Sport. Its starting price is not a promise to replace a broken crankshaft and every ancillary within the same amount.

Later Straight-six Badges

A late L494 diesel can belong to the straight-six family. We distinguish it from the V6 before ordering parts or quoting. The fuel and unit matter more than a familiar displacement badge.

SVR and Supercharged Petrol

SVR belongs with the relevant AJ133 V8 application, while the AJ126 is a supercharged V6. We keep those parts and diagnoses separate. Cooling or boost symptoms may need ancillary work rather than internal rebuilding.

Repair, Rebuild or a Compatible Replacement?

For a Range Rover Sport L494 with a running fault, diagnosis can remain narrower than rebuilding. Timing noise, oil-pressure loss and coolant symptoms must be assessed on their own evidence. We separate an electrical or ancillary cause from measured internal wear. A head, crankshaft or block finding then establishes whether the original engine can be saved and which components the written quote needs to cover.

FindingWork to compareRelevant service
Noise or warning without established internal damageDiagnosis and a targeted repairEngine diagnostics
Repairable head, timing or bearing damageDefined work on the original unitRebuild pricing
Unserviceable major coreWider core work or suitable alternativeWritten quote process

Arrange Your Vehicle or Removed-Engine Assessment

Send the registration, VIN, engine identity and existing report. We agree the diagnostic or strip-down scope before work. A vehicle and a removed core need different intake and fitting arrangements. Diagnostics · Removed-engine intake · Insured collection.

L494 Supply and Fit versus Rebuilding Your Engine

A replacement enquiry often starts with the same question as a rebuild: what is actually damaged? We assess whether the existing core is usable before comparing another unit. The V6 diesel, supercharged petrol and later powertrains remain separate offers. A complete quote names the engine scope, vehicle labour and attached equipment rather than allowing a low engine-only listing to stand for the finished job. If another garage has removed the unit, send its report and inventory.

2.0 Ingenium Diesel: Chain, Oil Condition and Core Damage

Timing noise, rising oil level and a stopped engine are different starting points. We consider the diagnostic report, timing condition and evidence of lubrication or internal damage before quoting chain-only work or rebuilding. Earlier and later engine identities are matched to the vehicle; a power badge alone is not a stamped-code confirmation.

4.4 SDV8: Diagnose the V8 Diesel Installation

The 448DT diesel is separate from the later 4.4 twin-turbo petrol V8. Low oil pressure, bearing damage and turbo-related contamination need a defined inspection route. The condition of the original core and the attached equipment determine what can be rebuilt and which additional components must be priced separately.

Supercharged V8: Internal Damage or Attached Equipment

A supercharger or cooling complaint does not by itself establish damage to the block, bearings or bores. We separate those findings before defining the rebuild. The precise output and installation determine the parts match; an SVR or XJR badge is not a universal exchange-unit specification.

V6 Diesel: Bearings, Oil Pressure and Timing

A heavy knock, oil-pressure warning or sudden stop needs a different investigation from a cooling or timing complaint. We inspect the crankshaft, bearings and reusable core where bottom-end damage is suspected. Timing work follows the installed V6 diesel specification, not an Ingenium chain assumption. The vehicle installation and complete written scope matter as much as the family name.

Frequently Asked Questions

Is the SVR a supercharged V6?

No. The L494 SVR enquiry uses the appropriate AJ133 V8 route, identified for the actual car.

Do you accept plug-in-hybrid vehicles?

No. We do not accept plug-in-hybrid engine or electrical work. Mechanical engine work on 48V mild-hybrid vehicles is a separate, accepted service; hybrid electrical repairs are excluded.

Can a late L494 have a straight-six diesel?

Yes. We check the actual year and VIN rather than treating every L494 3.0 diesel as a 306DT V6.

Does the Range Rover Sport engine amount include refitting?

The quoted engine amount covers the named own-engine work. Vehicle removal, refitting, recovery and separately required ancillary work are itemised for the actual installation.

Can my garage send this engine for bench work?

Yes, by prior arrangement. We agree the unit identity, inventory and return specification, while your garage retains the stated installation responsibilities.

When can you confirm the completion date?

We discuss the expected sequence after identifying this unit, its inspection findings and necessary parts. Further damage or unavailable components can alter the schedule.

Speak to Our Specialist Technicians

Our specialist technicians have 15+ years’ experience and 3,200+ engine rebuilds. Our rebuild work includes a 12-month unlimited-mileage warranty on covered components and labour, subject to the written warranty terms and the required chargeable 2,000-mile service. No deposit is required for standard engine work; any advance payment for bespoke parts is agreed separately.

Call 01268 944339, WhatsApp 07351 691324, email info@rangeroverengines.uk or request a free initial quote.

Workshop: Unit A5, Windsor Road Commercial Estate, Ramsden Heath, Billericay, Essex CM11 1QE. Hours: Monday–Friday 9am–6pm; Saturday 11am–2pm.

TDV6 and SDV6 Crankshaft Failure Repair · Discovery 4 3.0 Diesel Engine Failure Repair · Range Rover Sport L494 Engine Failure Repair

Contracting company: JLR Engine Specialists Ltd (company number 16500838). We operate one workshop at Billericay; other areas are served through arranged collection.